registrar@vssut.ac.in +91 8480441756 Public Self Disclosure UHV Cell

ବୀର ସୁରେନ୍ଦ୍ର ସାଏ ବୈଷୟିକ ବିଶ୍ୱବିଦ୍ୟାଳୟ

वीर सुरेंद्र साई प्रौद्योगिकी विश्वविद्यालय

Veer Surendra Sai University of Technology

News Flash

All Publications

  • Development of a composite index to investigate the impact of renewable resource time series dynamics on power systems, SERB-CRG, DST, Govt. Of India, 2023
  • Analysis of Wind Speed Time Series for Prospective Power Generation Applications in Odisha, TEQIP-III Seed Grant, 2020
  • Wind Power Potential Assessment and Generator Selection for Ten Locations in Odisha, TEQIP-II Seed Grant, 2016.
  • Co-Principal Investigator of AICTE-RPS Projects-19,” Transient Stability Analysis and Control of Power Systems with Excitation Control-2012, VSSUT, Burla
  • FPGA Based Power Quality Estimator For Smart Grid Applications, DST, Govt. of Odisha, 2022-2025, Ongoing at Dept. of ETC, VSSUT, Burla, Principal Investigator(9.98 Lakhs)
  • Successfully Completed the Consultancy Work on \"GAGAN Satellite enabled GPS PDAs\" for Dept. of Forest, Govt. of Odisha during 2015-16 on behalf of Dept. of Electronics and Telecommunication Engineering Dept., IIIT Bhubaneswar,Odisha.
  • “Green synthesis, characterization and antibacterial activity studies of new multifunctional nano polymeric material, which may have multidimensional application in water purification” <strong>Polymer Bulletin</strong> (published online) DOI: 10.1007/s00289-021-04046-5
  • “Synthesis and Characterization of Graphene Oxide and Graphene from Coal” <strong>MaterialsToday:Proceedings,</strong>56,2421(2022).DOI:10.1016/j.matpr.2021.08.206
  • “Synthesis and Characterization of a Novel Silver Nanoparticles decorated functionalized Single-walled Carbon Nanotubes Nanohybrids embedded Polyaniline Ternary Nanocomposites: Thermal, Dielectric, and Sensing Properties” <strong>Polymer-Plastics Technology and Materials</strong> (published Online) DOI: 10.1080/25740881.2022.2101118.
  • “Nano BN reinforced cellulose-based terpolymeric hybrid nanocomposites as packaging materials” <strong>Polymer-Plastics Technology and Materials</strong>, 61(11), 1233 (2022). DOI: 10.1080/25740881.2022.2044048
  • “Green solvents: A suitable alternative for sustainable chemistry” <strong>Materials Today: Proceedings</strong>, 47(5), 1234 (2021). DOI: 10.1016/j.matpr.2021.06.458.
  • “Antibacterial Activity of Thiazole and its Derivatives: A Review” <strong>Biointerface Research in Applied Chemistry</strong>, 12(2), 2171(2022). DOI: 10.33263/BRIAC122.21712195
  • “Preparation and Characterization of Silver Nanoparticles/Graphene Oxide Hybrid Nanofiller Reinforced-Polyaniline” <strong>Plastics, Rubber and Composites: MacromolecularEngineering,51(2),72(2022)</strong>.DOI:10.1080/14658011.2021.1939587
  • “Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” <strong>Nano-Structures & Nano-Objects</strong>, 26, 10074(2021). DOI: 10.1016/j.nanoso.2021.100747
  • “A Comprehensive Review on Quinones based Fluoride Selective Colorimetric and Fluorescence Chemo sensors” <strong>Journal of Fluorine Chemistry</strong>, 244, 109744 (2021) DOI: 10.1016/j.jfluchem.2021.109744
  • “Effect of presence of tetra alkyl ammonium bromides on solution behaviour of 1-Butyl-2, 3-dimethylimidazolium chloride at different temperatures: Volumetric and Acoustic studies” Chemical Data Collection (Elsevier) ,28,100438(2020) DOI:10.1016/j.cdc.2020.100438
  • “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, (Elsevier) (Impact Factor: 3.206) 154, 104577 (2020) doi.org/10.1016/j.microc.2019.104577.
  • “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry (Elsevier) (Impact Factor: 3.261), 386, 112098 (2020). DOI: 10.1016/j.jphotochem.2019.112098.
  • “ Ultrasonic studies on temperature dependence of ion solvent interactions of ionic liquid 1-butyl-2,3- dimethylimidazolium chloride in aqueous solutions of tetra-n-butylammonium bromide at T = (298.15 to 313.15) K” Biointerface Research in Applied Chemistry,10(2), 5259-5265 (2020) DOI:10.33263/BRIAC102.259265
  • “ Applicability of Thermoacoustic parameters for the Determination of Intermolecular FreeLength of 1-Butyl-2,3-dimethyl Imidazolium Chloride in Mixed Solvents at T = 298.15 K to 313.15 K” Asian Journal of Chemistry ,2719, 31(12), 2019.DOI: 10.14233/ajchem.2019.22124
  • “Nano Gold Hybrid Polyvinyl Alcohol Films for Sensing of Cu2+ ions” Chemistry Select, (Wiley-VCH) 4, 001 –011 (2019). (Impact Factor: 1.716) DOI: doi.org/10.1002/slct.201902167.
  • “Nano-CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science (Wiley), 136, 48298 (2019). DOI: 10.1002/app.48298 (Impact Factor: 1.991).
  • “Nanoclay Decorated Polyacrylic acid-starch Hybrid Nanocomposite Thin Films as Packaging Materials” Polymer Composites (Wiley), 40:229–239, (2019). DOI: 10.1002/pc.24326 (Impact Factor: 2.262).
  • “Dual Activities of Nano Silver Embedded Reduced Graphene Oxide Using Clove Leaf Extracts: Hg2+ Sensing and Catalytic degradation” Chemistry Select, (Wiley-VCH) 4, 2593–2602 (2019). (Impact Factor: 1.716) DOI: 10.1002/slct.201803725.
  • “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry (Wiley), (Impact Factor: 1.53) DOI:10.1002/poc.3971 (2019).
  • “Nano Silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, (Elsevier) 246, 96-107 (2017) (Impact Factor: 6.393).Doi: 10.1016/jsnb2..
  • “Aqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Study” J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
  • “Controlled Growth of CdS Quantum Dot in an Amphiphilic Diblock Copolymer Poly(2-Vinyl Pyridine)-b-Poly(n-Hexyl Isocyanate) Reversed Micelle Nanoreactor” Journal of Nanoscience and Nanotechnology, 15(9) , 6779( 2015) (Impact Factor-1.354) DOI: 10.1166/jnn.2015.16774
  • “InP/ZnS–graphene oxide and reduced graphene oxide nanocomposites as fascinating materials for potential optoelectronic applications” Nanoscale(RSC), 5, 9793 (2013)(Impact factor- 6.895) DOI: 10.1039/c3nr02333h
  • Sukalyan Dash, Bijay K. Mishra: Oxidation of Styrylpyridinium Dyes by permanganate ion (Bull. Chem. Soc. Jpn. 67, 1994, 673).
  • Sukalyan Dash, Bijay K. Mishra: Mn(VII) Oxidation using cetyltrimethylammonium permanganate-Self oxidation of CTAP and Oxidation of Benzylalcohol (Int. J. Chem. Kinet.,27(7), 1995,627).
  • Sukalyan Dash, S. K. Parida, S. Patel, Bijay K. Mishra: Adsorption of organic compounds on silica surfaces (AdvColl Surf Sci, 121, 2006, 77) (18th Hottest article during Oct-Dec, 2006 in all Journals of Sci Dir., and 1st Hottest article in that Journal for two consecutive quarters).
  • Sukalyan Dash, M. Panigrahi, S. Patel, P. K. Behera, B. K. Mishra: Reversal in solvatochromism in some novel styrylpyridinium dyes having a hydrophobic cleft (Spectrochim. Acta. Part A, 68, 2007, 757).
  • Sukalyan Dash, S. Mishra, S. Patel, Bijay. K. Mishra: Organically Modified Silica: Synthesis and Applications due to its Surface Interaction with Organic Molecules (Adv. Coll. Interface Sci, 140, 2008, 77-94).
  • Sukalyan Dash, P. Mukherjee, S. Patel, H. N. Pati, Bijay K. Mishra: Alkylation of Ethanolamines: An Approach to a Novel Class of Functional Surfactants (Synthetic Commn., 39, 2009, 2529-2539).
  • Sukayan Dash, S. Patel, Bijay. K. Mishra: Oxidation by permanganate: synthetic and mechanistic aspects (Tetrahedron, 69, 2009, 707-739). [Included in Chemistry Global Wikipedia]
  • Sukalyan Dash, M. Panigrahi, S. Baliarsingh, P. K. Behera, S. Patel, B. K. Mishra: Cyanine dyes - nucleic acids interactions (Curr Org Chem, 15, 2011, 2673-2689).
  • Sukalyan Dash, M. Panigrahi, S. Patel, B. K. Mishra: Preferential Solvation of Styryl Pyridinium Dyes in Binary Mixtures of Alcohols with Hexane, Dioxane and Dichloromethane (J Phys Chem B, 115, 2011, 99-108).
  • Sukalyan Dash, P. Mukherjee, S. K. Padhan, S. Patel, P. K. Mohapatra, B. K. Mishra: Effect of temperature on pseudoternary system Tween-80–butanol–hexane–water (J Colloid Interface Sci, 355, 2011, 157-163).
  • Sukalyan Dash, P. Mukherjee, S. K. Padhan, S. Patel, B. K. Mishra: Clouding behaviour in surfactant systems (Advances in Colloid and Interface Science, 162, 2011, 59-79).
  • SukalyanDash,P. Mukherjee, S. Sahu, S. K. Padhan, S. Patel, P. Mohapatra, B. K. Mishra: Temperature induced emulsification and demulsification of pseudoternary mixtures of Tween80-butanol-kerosene-water system (Industrial & Engineering Chem. Res. ACS, 2011, Accepted).
  • Sukalyan Dash, M. Panigrahi, S. Patel, P. K. Behera, B. K. Mishra: 'Synthesis of cyanines: A review (Tetrahedron, 68, 2012, 781-805).
  • Sukalyan Dash, PS Guru: Eggshell particles (ESP) as potential adsorbent for styrylpyridinium dyes - A Kinetic and thermodynamic Study (J Dispersion Sci Tech, 33, 1012-1020, 2012).
  • Sukalyan Dash, P. Mukherjee, S. Patel, B. K. Mishra: Self Organized Assemblies of Surfactants Derived from Ethanolamines (J Dispersion Sci Tech, 33, 881-886, 2012).
  • Sukalyan Dash, PS Guru: Adsorption of some tailor-made styrylpyridinium dyes on sodium dodecylsulphate-treated eggshell particles (SDS-ESP): Impact of dye chain-length and substituent (J Dispersion Sci Tech, 34, 898-904, 2013)
  • Sukalyan Dash, PS Guru: Amino Acid Modified Eggshell Powder (AA-ESP)—A Novel Bio-Solid Scaffold for Adsorption of Some Styrylpyridinium Dyes (J Dispersion Sci Tech, 34, 1099-1112, 2013).
  • Sukalyan Dash, PS Guru, B Acharya: Tween 80-n-Butanol-Diesel-Water Microemulsion System – A Class of Alternative Diesel Fuel (J Dispersion Sci Tech, 35, 1492-1531, 2014).
  • Sukalyan Dash, PS Guru: Sorption on Eggshell Waste – A review on ultrastructure, biomineralization and other applications (Adv Colloid Interface Sci, 209,49-67, 2014).
  • Sukalyan Dash, PS Guru, SaritaTripathy: Solvatochromic behavior of some -Styrylpyridinium dyes (Spectochem. Acta, 125, 422-430, 2014).
  • Sukalyan Dash, PS Guru, SP Bank: β-CD assisted dissolution of quaternary ammonium permanganatesin aqueous medium (Carbohydrate Polymers, 111, 806-812, 2014).
  • Sukalyan Dash, PS Guru, SP Bank: UV–Vis spectrophotometric studies of self-oxidation/dissociation of quaternary ammonium permanganates (QAP) – impact of solvent polarity (Spectochem. Acta, 142, 34-42, 2015).
  • Sukalyan Dash, SaritaTripathy: Solvation studies of some tailor made α-N,N-dimethylaminostyryl-N-alkyl pyridinium dyes in binary solvent mixtures containing alcohols, hexane, 1,4-dioxane, DCM and acetone (J Molecular Liquids, 206, 29-38, 2015).
  • Sukalyan Dash, PS Guru, SP Bank: Green and Efficient: In situ Oxidation kinetics of some tailor-made -styrylpyridinium dyes in aqueous medium using β-CD-CTAP complex(Industrial and Engineering Chemistry Research, 54, 9142-9149, 2015).
  • Sukalyan Dash, PS Guru, B Acharya: Tween-80–n-butanol/isobutanol–(Diesel + Kerosene)–Water microemulsions – Phase behavior and fuel applications (Fuel, 171, 87-93, 2016).
  • Sukalyan Dash, PS Guru, S Priyadarshini: ˇβ-CD assisted aqueous dissolution of cetylpicolinium dichromates (CPDC)—Evolution of a class of green water compatible lipopathic Cr(VI) oxidants (Carbohydrate Polymers, 171, 122-128, 2017).
  • M Mishra, I Mukherjee, AK Mall, A Mitra, Sukalyan Dash, S Chatterjee, S Mukherjee, A Roy: “Truncated hexagonal bi-pyramidal gallium ferrite nanocrystals: integration of structural details with visible-light photo-activity and self-cleaning Properties” (Journal of Materials Chemistry A, DOI: 10.1039/c8ta02749h, 2018).
  • S. Swain, A Biswal, P Mohapatra, S K Swain* “Polyurethane Nanocomposite for Gas Separation: A Review” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2025). (Impact Factor: 2.439) ISSN: 2574-089X, DOI: https://doi.org/10.1080/25740881.2025.2491552
  • S K. Das, D Bharatiya, S Minz, R Saraswat, S. K. Swain*, “Effect of clay on dielectric behaviour of TiO2 embedded PVDF nanocomposite for charge storage applications”, Materials Science in Semiconductor Processing (Elsevier) 192, 109480 (2025) (Impact Factor:4.2), ISSN: 1369-8001, DOI: https://doi.org/10.1016/j.mssp.2025.109480
  • A. Biswal, S. S. Purohit, L. Mishra, M. Mishra, B. R. Routray, S. B. Biswal, S. Nayak, B. C. Behera and S. K. Swain* “Nano CaCO3 mediated in vitro and in vivo wound healing characteristics of chitosan films without added drugs” International Journal of Biological Macromolecules, (Elsevier), 142057 (2025). (Impact Factor: 8.4), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.142057
  • S. S. Purohit, A. Biswal, P. Mohapatra, O. Khamari, K. Dash, M. Mishra, S. B. Biswal, S. Nayak and S. K. Swain* “Lysozyme/N-GQD loaded carboxymethyl cellulose hydrogels for healing of excision wounds in Drosophila and Sprague Dawley rats” International Journal of Biological Macromolecules, (Elsevier) 141638 (2025). (Impact Factor: 8.4). ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141638
  • S. Swain, S Patra, S Panigrahi, A Biswal, P Mohapatra, S K Swain* “Rhodamine B embedded silver nanogranules for selective sensing of l-cysteine” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy (Elsevier) 330, 125722 (2025) (Impact Factor:4.3) ISSN: 1386-1425 , DOI: https://doi.org/10.1016/j.saa.2025.125722
  • S S Sana, C J Raorane, R Venkatesan, S Roy, S. K. Swain, Seong-Cheol Kim, M Al-Tabakha, R R. Bhandare , V Raj, S Lee, “State-of-the-art progress on locust bean gum polysaccharide for sustainable food packaging and drug delivery applications: A review with prospectives” International Journal of Biological Macromolecules, (Elsevier), Available online 2 July 2024, 133619 (Impact Factor: 7.7), ISSN: 1879-0003. https://doi.org/10.1016/j.ijbiomac.2024.133619
  • S. Patra, D. Sahoo and S. K. Swain* Carbon quantum dots in N, N?-Dicyclohexylcarbodiimide assisted cellulose: A fluorescence sensitive approach for ex vivo glucose monitoring in human serum” International Journal of Biological Macromolecules, (Elsevier), 283(3), 137761 (2024). (Impact Factor: 7.7), ISSN: 1879-0003. https://doi.org/10.1016/j.ijbiomac.2024.137761.
  • K. M. Sahu, A. Biswal, U Manisha and S. K. Swain* “ Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels” . International Journal of Biological Macromolecules, (Elsevier), 269(2), 132132 (2024). (Impact Factor: 8.2) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2024.132132 (Early view)
  • Sk. Nazrul, A. Biswal, K M Sahu, S S Sana and S. K. Swain* " Nano Silver Imprinted Starch-co-Polymethylmethacrylate Sandwiched Layered Double Hydroxide Nanocomposite Films for Packaging Application" Starch Strake (Wiley), 00, 00-00 (2024). (Impact Factor: 2.741) ISSN: 1521-379X. DOI: 10.1002/star.202300106. (Early view)
  • P. K Behera, D. Sahu, B R Jali, A, K. Barick, S K Swain, P Mohapatra “A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent “Turn off” Mercury (II) Ion Sensing” Journal of Fluorescence (Springer); 00-00, 00 (2024) (Impact Factor: 2.7) ISSN: 1053-0509 Doi.org/10.1007/s10895-024-03649-1
  • J P Behera, S Patra, S K Najrul, S K surmma, D Kumar, M K Berma, A K Katare and S K Swain* “Nano Boron Nitride Laminated Poly(ethyl methacrylate)/Poly(vinyl alcohol) Composite Films Imprinted with Silver Nanoparticles as Gas Barrier and Bacteria Resistant Packaging Materials” Journal of Applied Polymer Science, 00, 00, (Wiley), (2024). (Impact Factor: 3) ISSN: 1097-4628. DOI: 10.1002/app.20232930.
  • S K Das, D Bharatiya, B Padhi. L Pradhan, B K Jena and S K Swain* “Effect of clay on Ti O 2 embedded PMMA nanocomposit e fo r high - performanc e energy storag e applicatio n” Journal of Energy Storage, 82, 110586 (Elsevier), (2024). (Impact Factor: 9.4) ISSN: 2352-1538. DOI: h t t p s : / / d o i . o r g / 1 0 . 1 0 1 6 /j . e s t . 2 0 2 4 . 1 1 0 5 8 6.
  • Sk. Nazrul, A. Biswal, L. Behera, and S. K. Swain*"Synthesis of sandwiched chitosan-g-PMMA nanocomposite by layered double hydroxides for packaging applications" Polymer Bulletin (Springer), 81(1), 633-660 (2024). (Impact Factor: 3.2) ISSN: 1436-2449. DOI: 101007/s00289-023-04732-6.
  • B. Patra, A Biswal, S. Swain, L. Behera and S. K Swain “Role of Nano SiC in Enhancement of Mechanical, Barrier and Flame-Retardant Properties of PANI-co-PAA Films” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2024). (Impact Factor: 2.439) ISSN: 2574-089X DOI: https://doi.org/10.1080/25740881.2023.2297963 .
  • A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.9) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
  • S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
  • S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.4) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930.
  • S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) XXX, XXX?XXX(2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
  • P K Behera, D Sahu, S. K. Swain, P. Mohapatra “Capsule shaped nano silver embedded reduced graphene oxide nanocomposites for sensing of mercury ions” Applied Nanoscience(Springer), 00-00 (2023) (Impact Factor: 3.869) ISSN: 2190-5517https://doi.org/10.1007/s13204-023-02980-6
  • S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 2.3) ISSN: 2211-7156 https://doi.org/10.1016/j.rechem.2023.101172
  • S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 3.8) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
  • D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.221) ISSN: 0091-4037. DOI: 10.1080/00914037.2021.1990057.
  • A Biswal, S S Purohit and S. K. Swain* “Chitosan based composite scaffolds in skin wound repair: A review” Journal of Drug Delivery Science and Technology, (Elsevier) 84, 104549(2023) (Impact Factor: 5.062 ) ISSN: 1773-2247 DOI:10.1016/j.jddst.2023.104549.
  • K. M. Sahu, S. Patra and S. K. Swain* “Host-Guest Drug Delivery by β-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.025) ISSN: 1879-0003. DOI:10.1016/j.ijbiomac.2023.124338.
  • D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 38, 3395–3406 (2023). (Impact Factor: 2.7) ISSN: 2044-5326. 10.1557/s43578-023-01068-9
  • S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646(1-10) (Elsevier), (2023). (Impact Factor: 5.304) ISSN: 0026-265X. DOI:10.1016/j.microc.2023.108646.
  • S. K. Swain, M. Dey and P. K. Sahoo, “Emulsifier-free Emulsion Polymerization of Acrylonitrile in presence of Inorganic powders” J. Tech. & Research Chem., 4(2), 21-28 (1997). ISSN# 0971-6408 (India)
  • S. K. Swain, N.L.Debsarkar and P.K.Sahoo, “Graft Co-polymerization of Acrylamide onto Jute Pulp Initiated by Cu(II)SO4/Glycine/KHSO5/H2OSystem”, J. Teach. & Research Chem., 7(1), 17-22 (2000). ISSN# 0971-6408 (India)
  • N Sarkar, G Sahoo, S K Kisku, G Prusty and S K Swain “Effect of Carbon Nanotubes on Electrical Properties of Polymer Nanocomposites: A Review” Int. J Adv. Chem Sci Appl., 1, 42-50 (2013). ISSN # 2347-7601. (Impact Factor: NA)
  • G Nath, S K Swain, A Sarangi and R Paikray “Sonochemical analysis of solvent mixtures used for surface treatment of natural fibers” J Pure Appl Ultrasonic 35 (4), 133-136 (2013). ISSN # 0256-4637. (Impact Factor: NA)
  • T. Ravinder, S.S Kaki, S. Kanjilal, B.V.S.K. Rao, S.K.Swain, R.B.N. Prasad “ Refining of castor and tapioca leaf fed eri silkworm oils” International Journal of Chemical Science and Technology, 5(2), 32-37 (2015). ISSN: 2249-8532 (Impact Factor: NA)
  • T. Ravinder, S. S Kaki, I.N.S.S. Prabhakar, B.V.S.K. Rao, S. K. Swain, R.B.N. Prasad “Effect of natural and synthetic antioxidants on oxidation of ERI silkworm oils” Indo American Journal of Pharmaceutical research,5(11), 3666-3675 (2015). ISSN No. 2231-6876. DOI: 10.1044/1980-iajpr.151202 (Impact Factor: NA)
  • S. K. Swain* and I Jena “Polymer/CNT nanocomposites: A novel material” Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: NA)
  • S K Swain and P K Sahoo “Synthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfate” Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348) (Impact Factor: 614).
  • A Mohanty and S K Swain* “Study of solution properties of albumin protein by ultrasonic technique” Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.158)
  • S K Swain* and P. Priyadasrshini, “Ultrasonic and viscometric investigation of soya protein in aqueous solution” Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.822).
  • S K Patra, G Prusty and S K Swain* “Ultrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant properties” Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 1.264)
  • A. Sarangi, G Nath* and S K Swain* “Compatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequencies” Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.822)
  • D. Bharatia, B. Parhi Hemsagar Sahu and S K Swain* Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics (Springer), (2023). (Impact Factor: 2.779) ISSN: 0957-4522. DOI: 10.1007/s10854-023-09928-0
  • S. Patra, K. M. Sahu, A A. Reddy and S K Swain* Polymer and Biopolymer Based Nanocomposites for Glucose Sensing, International Journal of Polymeric Materials and Polymeric Biomaterials (Tylor & Francis), (2023). (Impact Factor: 3.221) ISSN: 1563-535X DOI: 10.1080/00914037.2023.2175824.
  • Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials, 1-11, (Tylor & Francis), (2022). (Impact Factor: 2.439) ISSN: 2574-089X DOI: 10.1080/25740881.2022.2086814.
  • P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials, 1-11, (Tylor & Francis), (2022). (Impact Factor: 2.439) ISSN: 2574-089X. DOI: 10.1080/25740881.2022.2044048.
  • B. Parhi, D. Bharatiya, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science (Wiley), (2022). (Impact Factor: 3.125) ISSN: 1097-4628. DOI: 10.1002/app.20213091.
  • K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 3.662) ISSN: 0925-8388. DOI: 10.1016/j.mtcomm.2020.101869.
  • D. Bharatia, B. Parhi and S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.317) ISSN: 03602559. DOI: doi.org/10.1016/j.jallcom.2021.159274.
  • P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*” Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2021). (Impact Factor:5.454) ISSN: 2352-507X. DOI: org/10.1016/j.nanoso.2021.100747.
  • A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 2.439) ISSN: 03602559. DOI:10.1080/25740881.2020.1793196.
  • K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 3.125) ISSN: 1097-4628. DOI: 10.1002/app.20200978.
  • B. Parhi, D. Bharatia and S K Swain* “Surfactant Free Green Synthesis of GOSiMa Hybrid Nanocomposite for Charge Storage Application” Ceramic International, (Elsevier), 46(17), December 01, 2020, 27184-192 (2020) (Impact Factor: 3.830) ISSN 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
  • N. Sarkar, G. Sahoo and S K Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids(Elsevier) 302, 15 March 2020, 112591-112608 (Impact Factor: 5.065), (2020). 10.1016/j.molliq.2020.112591. ISSN: 0167-7322.
  • K Prusty and S K Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science (Wiley) (2020), (Impact Factor: 2.52) (Accepted) ISSN: 1097-4628. DOI: 10.1002/app.20200978
  • A. Biwal, P. Sethy and S K Swain* “Change in Orientation of Polyacrylic acid and Chitosan Networks by Imprintment of Gold Nanoparticles” Polymer-Plastic Technology and Materials, (Tylor & Francis), (2020) (Impact Factor: 1.973). ISSN: 03602559 DOI:10.1080/25740881.2020.1793196.
  • N. Sarkar, G. Sahoo and S K Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects (Elsevier), 23, 100507-100523 (2020) (Impact Factor:1.113) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
  • N. Sarkar, G. Sahoo and S K Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics (Elsevier) (Impact Factor: 3.408), 250, August 01, 123022-123037 (2020). doi.org/10.1016/j.matchemphys.2020.123022. ISSN: 0254-0584.
  • K Prusty and S K Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science (Wiley) 137(42), (2020), 49284 (Impact Factor: 2.52) https://doi.org/10.1002/app.49284. ISSN: 1097-4628.
  • P. K Sethi, K. Prusty, P Mohapatra and S K Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science (Wiley), 137 (3), January 15, 2020, 48298-308 (2020). DOI: 10.1002/app.48298 (Impact Factor: 2.52). ISSN: 1097-4628.
  • B. Parhi, D. Bharatiya and S K Swain* “Application of Quercetin Flavonoid Based Hybrid Nanocomposites: A Review” Saudi Pharmaceutical Journal (Elsevier) (Impact Factor: 2.879), 00, 00-00 (2020) Early View. doi.org/10.1016/j.jsps.2020.10.017. ISSN: 1319-0164.
  • K. Prusty, S. Patra and S K Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication (Elsevier) (Impact Factor: 2.678), 00, 00-00 Available online 11 November 2020, 101869 (2020). doi.org/10.1016/j.mtcomm.2020.101869.
  • D. Sahu, N. Sarkar, P Mohapatra and S K Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, (Elsevier) (Impact Factor: 3.206) 154, 104577 (2020) doi.org/10.1016/j.microc.2019.104577.
  • D. Sahu, P Mohapatra and S K Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry (Elsevier) (Impact Factor: 3.261), 386, 112098 (2020). DOI: 10.1016/j.jphotochem.2019.112098.
  • D. Sahu, G Sahoo, P Mohapatra and S K Swain* “Nano Gold Hybrid Polyvinyl Alcohol Films for Sensing of Cu2+ ions” Chemistry Select, (Wiley-VCH) 4, 001 –011 (2019). (Impact Factor: 1.716) DOI: doi.org/10.1002/slct.201902167.
  • P. K Sethi, K. Prusty, P Mohapatra and S K Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science (Wiley), 136, 48298 (2019). DOI: 10.1002/app.48298 (Impact Factor: 1.991).
  • B B Singh, F Mohanty, S S Das*, and S K Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, (Elsevier), (2019) Doi. org/10.1016/j.jtte.2019.02.003. (Impact Factor:1.48)
  • K Prusty and S K Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules (Elsevier), 126(1), 665-675 (2019) Doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130. (Impact Factor: 4.784).
  • P K Sethy, K Prusty, P Mohapatra and S K Swain* “Nanoclay Decorated Polyacrylic acid-starch Hybrid Nanocomposite Thin Films as Packaging Materials” Polymer Composites (Wiley), 40:229–239, (2019). DOI: 10.1002/pc.24326 (Impact Factor: 2.262).
  • D. Sahu, G Sahoo, P Mohapatra and S K Swain* “Dual Activities of Nano Silver Embedded Reduced Graphene Oxide Using Clove Leaf Extracts: Hg2+ Sensing and Catalytic degradation” Chemistry Select, (Wiley-VCH) 4, 2593–2602 (2019). (Impact Factor: 1.716) DOI: 10.1002/slct.201803725.
  • G Sahoo, N Sarkar and S K Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites (Wiley), (2019). DOI:10.1002/pc.25260 (Impact Factor: 2.262).
  • F. Mohanty and S K Swain* "Silver Nanoparticles Decorated Polyethylmethacrylate/Graphene Oxide Composite: As Packaging Material" Polymer Composites (Wiley), 40: E1199– E1207, 2019. (Impact Factor: 2.262) DOI:10.1002/pc.24944.
  • F Mohanty and S K Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects (Elsevier), 18: 100300 (2019). doi.org/10.1016/j.nanoso.2019.100300 (Impact Factor: 0.772) Accepted.
  • K Prusty and S K Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Engineering, (Tylor & Francis), (2019) (Impact Factor: 1.705). DOI: 10.1080/25740881.2019.1602140.
  • D. Sahu, N Sarkar, G. Sahoo, P Mohapatra and S K Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry (Wiley), (Impact Factor: 1.53) DOI:10.1002/poc.3971 (2019).
  • K Prusty, A Biswal, S B Biswal and S K Swain*, “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics (Elsevier), 234, 378-289(2019). (Impact Factor: 2.781) doi.org/10.1016/j.matchemphys.2019.05.038.
  • K Prusty, P K Sethy and S K Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology (Wiley), 37, 37739-37791 (2018), DOI: 10.1002/adv.22161 (Impact Factor: 2.663).
  • K. Prusty and S K Swain* “Nano Silver Decorated Polyacrylamide/Dextran Nanohydrogels hybrid composites for Drug Delivery Applications” Materials Science & Engineering: C (Elsevier) 85, 130-141 (2018) (Impact Factor: 4.959). DOI: doi.org/10.1016/j.msec.2017.11.028.
  • K Prusty and S K Swain* “Nanostructured Chitosan Composites for Cancer Therapy: A Review” International Journal of Polymeric Materials and Polymeric Biomaterials (Tylor & Francis), (Impact Factor: 2.263) 67(15),879-888 (2018) DOI. 10.1080/00914037.2017.1393678.
  • S. K. Swain*, S. Barik, G C Pradhan and L. Behera “Delamination of Mg-Al Layered Double Hydroxide on Starch: Change in Structural and Thermal Properties” Polymer-Plastics Technology and Engineering (Tylor & Francis), (Impact Factor: 1.655) 57(15), 1585-1591 (2018) Doi: 10.1080/03602559.2017.1410844.
  • N. Sarkar, G Sahoo, R Das and S K Swain* “Three-Dimensional Rice Straw Structured Magnetic Nanoclay Decorated Tri-polymeric Nanohydrogels as Superabsorbent of Dye Pollutants” ACS Applied Nano Materials (American Chemical Society) 1, 1183-1203 (2018). DOI: 10.1021/acsanm.7b00358
  • S Gantayat, N. Sarkar, G Prusty, D. Rout and S K Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology (Wiley), 37, 21654-21662 (2018), DOI: 10.1002/adv. 21654 (Impact Factor: 2.663)
  • S K Swain* and K Prusty” Biomedical applications of acrylic based nanohydrogels: A review” Journal of Materials Science (Springer) 53, 2303-2325 (2018) (Impact Factor: 3.442) DOI: 10.1007/s10853-017-1726-x.
  • S Gantayat, D Rout, SK Swain* “Carbon Nanomaterials Reinforced Epoxy Composites: A Review” Polymer-Plastic Technology and Engineering, (Tylor & Francis), 57(1), 1-16 (2018) (Impact Factor: 1.655) DOI.org/10.1080/03602559.2017.1298802.
  • G Sahoo, N Sarkar and S K Swain* “The effect of reduced graphene oxide intercalated hybrid nanoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science (Elsevier) 162 69-82 (2018) (Impact Factor: 3.890).
  • K. Prusty and S K Swain* "h-BN huddled starch reinforced PolyethylhexylacrylatePolyvinyl alcohol thin films for packaging applications" Polymer Composites (Wiley), (2018). (Impact Factor: 2.262) Accepted. doi.org/10.1002/pc.24941.
  • N. Sarkar, G. Sahoo, R Das, G. Prusty and S K Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences (Elsevier), 109, 359-371 (2017) (Impact Factor: 3.532). doi.org/10.1016/j.ejps.2017.08.015.
  • S K Swain*, G C Pradhan, S. Dash, F Mohanty and L Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites (Wiley), (2017). DOI: 10.1002/pc.24326 (Impact Factor: 2.262) In Press.
  • Gyanaranjan Sahoo, N. Sarkar, D. Sahu and S K Swain* “Nano Gold Decorated Reduced Graphene Oxide Wrapped Polymethylmethacrylate for Supercapacitor Applications” RSC Advances (RSC), 7, 2137-2150 (2017). (Impact Factor: 3.049) DOI: 10.1039/c6ra26930c.
  • S Gantayat, N Sarkar, D Rout, SK Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics (Elsevier) 186, 29-35 (2017) doi.org/10.1016/j.matchemphys.2016.09.020 (Impact Factor: 2.781)
  • D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S K Swain* “Nano Silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, (Elsevier) 246, 96-107 (2017) (Impact Factor: 6.393).Doi: 10.1016/jsnb2..
  • Fanismita Mohanty, S K Swain* “Carbon Nanotube Embedded Polymer Composite: Properties and Applications” Current Organic Synthesis (Bentham Science Publishers.), 14 (2), 249-262 (2017) (Impact Factor: 1.690). DOI: 10.2174/1570179413666160831124314. (Invited article)
  • G Sahoo, N Sarkar and S K Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, (Tylor & Francis), 56(3), 334–345 (2017) (Impact Factor: 1.655) Doi: 10.1080/03602559.2016.1185629.
  • N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion properties” Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
  • Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* “Enzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Olein” Journal of Oil Palm Research Vol. 29 (1) 81 – 87 (2017) (Impact Factor: 0.427).
  • N Sarkar, G Sahoo and S K Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
  • F. Mohanty and S K Swain* “Effect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)” Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
  • S K Basiruddin and S K Swain* “Phenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensing” Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
  • K Prusty and S K Swain* “Nano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin films” Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
  • Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* “Aqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Study” J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
  • N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* “Anti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
  • G C Pradhan and S K Swain* “Graphite reinforced oxygen barrier conducting starch nanocomposites” Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
  • G C Pradhan, S Dash and S K Swain*, “Barrier properties of nano silicon carbide designed chitosan nanocomposites” Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
  • S Gantayat, G Prusty, D R Rout and S K Swain* “Effect of graphite platelets on thermal and mechanical properties of epoxy resin” New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
  • S Barik, S K Kisku, L Behera and S K Swain* “Enhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxide” Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
  • G Prusty, R Das and S K Swain* “Influence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)” Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
  • G C Pradhan, S Dash and S K Swain* “Effect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starch” Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
  • A K Pradhan, G Prusty and S K Swain* “Characterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubes”, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
  • S K Swain*, S K Kisku and G Sahoo “Preparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
  • G C Pradhan, S Dash and S K Swain* “Effect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starch” Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
  • J R Mohanty, S N Das, H C Das and S K Swain* “Effect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidone Fibers and Polymers” Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
  • A. Sarangi, G Nath* and S K Swain* “Compatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequencies” Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
  • S K Swain*, S Dash, S K Kisku, R K Singh “Thermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowder” Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
  • S K Swain*, S Patra and S K Kisku, “Study of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocomposites” Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
  • S K Kisku, S Dash and S K Swain* “Dispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Properties” Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
  • S K Swain*, G Prustry, Ashis S Ray and L Behera “Dispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization technique” Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
  • A Sarangi, G Nath*, S K Swain* and R Paikray “Chemical modification of natural fibers with acetone blended alcohol” Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: ‎0.42).
  • S K Kisku, N. Sarkar and S K Swain*, “preparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable properties” Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
  • G Prusty and S K Swain* “Dispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocomposites” Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
  • S K Swain*, B. Shur and S K Patra “Poly(acrylamide-co-vinyl alcohol)–Superabsorbent Materials Reinforced by Modified Clay” Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
  • S Dash and S K Swain* “Synthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbide” Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
  • S Dash and S K Swain* “Effect of nano boron nitride on the physical and chemical properties of soy protein” Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
  • S K Swain*, S Dash, C Behera, S K Kisku and L Behera “Effect of nano BN on the thermal properties of Cellulose” Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
  • A K Pradhan and S K Swain* “Synthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubes” Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
  • S K Swain*, A K Pradhan and H S Sahu “Synthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotube” Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
  • G Prusty and S K. Swain* “Dispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Properties” Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
  • S K Swain*, G Prusty and I Jena “Conductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticles” International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
  • S K Kisku and S K Swain* “Effect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine protein” Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
  • J R Mohanty, S N Das, H C Das and S K Swain* “Effective mechanical properties of PVA/DPL biocomposites” Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
  • S Dash, S K Kisku and S K Swain* “Effect of nano clay on morphological, thermal and barrier properties of albumin brovine” Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
  • S K Swain*, S K Patra and P Priyadarshini, “Soy protein/clay nanobiocomposites for ideal packaging materials” Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
  • G Prusty and S K Swain* “Dispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeability” New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
  • A K Pradhan and S K Swain* “Electrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes composites” Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
  • A K Pradhan and S K Swain* “Oxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ method” Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
  • S K Patra and S K Swain* “Effect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocomposites” Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
  • S K Kisku and S K Swain* “Study of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch composites” Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
  • S K Kisku and S K Swain* “Synthesis and characterization of chitosan/boron nitride composites” Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
  • S K Swain*, G Prusty and R Das “Sonochemical compatibility of PVA-PA blend in aqueous solution” Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
  • S K Patra, G Prusty and S K Swain* “Ultrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant properties” Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
  • S K Kisku and S K Swain* “Polymethyl methacrylate/soy protein green composites as gas barrier materials” Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
  • S K Swain* “Ultrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Properties” Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
  • S K Patra, G Prusty and S K Swain* “Synthesis of PAN/clay nanocomposites: study of gas permeation properties” International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: ‎0.56)
  • S K Swain* and S. K. Patra “Ultrasonic and viscometric study of synthesized pan/clay nanocomposites” International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
  • G Prusty and S K Swain* “Synthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocomposites” Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
  • S K Patra and S K Swain*, “Swelling study of superabsorbent PAA-co-PAM/clay nanohydrogel” Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
  • S K Swain* and P. Priyadasrshini, “Ultrasonic and viscometric investigation of soya protein in aqueous solution” Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
  • A Mohanty and S K Swain* “Study of solution properties of albumin protein by ultrasonic technique” Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
  • S.K.Swain* and I Jena “Polymer/CNT nanocomposites: A novel material” Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
  • H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* “Two- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zinc” Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
  • S K Swain and A I Isayev “PA6/clay nanocomposites by continuous sonication process” Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
  • P K Sahoo, R Samal, S K Swain, and P K Rana, “Synthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardant” European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
  • S Lapshine, S K Swain and A I Isayev, “Ultrasonic aided process for preparation of polyolefin-clay nanocomposites” Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
  • R Samal, S K Swain, P K Rana and P K Sahoo, “Biodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion technique” Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
  • S K Swain and A I Isayev, “Effect of ultrasound on HDPE/clay nanocomposites: rheology, structure and properties” Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
  • P K Sahoo, P K Rana and S K Swain “Interpenetrating Polymer Network PVA/PAA Hydrogels” International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
  • P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain “Characterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamide” International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
  • P K Rana, S K Swain, and P K Sahoo “Synthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradation” Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
  • P. K.Sahoo, B. Samal and S. K. Swain, “Co (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphology” Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
  • P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain “Characterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbency” Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
  • P K Sahoo, G C Sahu and S K Swain “Nonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-salts” Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
  • P K Sahoo, R Mohapatra, A Sahoo and S K Swain “Ultrasonic and viscometric investigations of a poly(vinyl alcohol)–dextran mixture in aqueous solution” Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
  • P K Sahoo, S K Swain and N L Debsarkar “Preparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiber” Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
  • S K Swain and P K Sahoo, “Emulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complex”, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
  • P.K. Sahoo, G.C. Sahoo and S. K. Swain “Effect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrile” European Polymer Journal (Elsevier), 38(2), 345–350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
  • S K Swain and P K Sahoo “Synthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfate” Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
  • P K Sahoo, M Dey, A Behera and S K Swain “Effect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfate” Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
  • P K Sahoo and S K Swain “Synthesis of zirconocene–acetylene and zirconocene-diacetylene polymers” Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
  • P K Sahoo, M Dey and S K Swain, “Emulsifier–free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfate” Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
  • POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, “Novel bionanocomposite systems for packaging applications” SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
  • S K Swain, N Sarkar, and G Sahoo “Coconut shell powder improves the mechanical performance of polypropylene biocomposites” SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
  • S K Swain, S K Kisku and S K Patra “Improving starch-based materials for packaging” SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
  • S K Swain* and G Prusty “Characterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocomposites” SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
  • B. P. Sahoo and S. Panda, Improved grey wolf optimization technique for fuzzy aided PID controller design for power system frequency control, Sustainable Energy, Grids and Networks, vol. 16, pp. 278-299, Dec. 2018.
  • B. P. Sahoo and S. Panda, Chaotic multi verse optimizer based fuzzy logic controller for frequency control of microgrids, Evol. Intell., pp. 1-22, Jun. 2020.
  • S. Behera, S. Sahoo and B.B. Pati, “A review on optimization algorithms and application to wind energy integration to grid,” in Renewable & Sustainable Energy Reviews (Elsevier), vol. 48, pp. 214–227 2015. (SCI). DOI: https://doi.org/10.1016/j.rser.2015.03.066 ISSN: 1364-0321 IF 16.799
  • S. Behera, B. Subudhi and B.B. Pati, “Design of PI Controller in Pitch Control of Wind Turbine: A Comparison of PSO and PS Algorithm,” International Journal of Renewable Energy Research (IJRER) vol. 6, no. 1, pp. 271-281, 2016, (ESCI/Scopus). DOI: https://doi.org/10.20508/ijrer.v6i1.3137.g6783 ISSN: 1309-0127
  • S. Behera, C. P. Sahoo, B. Subudhi and B.B. Pati, “Reactive power control of isolated wind-diesel hybrid power system using grey wolf optimization technique,” Procedia Computer Science (Elsevier) vol. 92, pp. 345 – 354, 2016. (UGC/Scopus) DOI: https://doi.org/10.1016/j.procs.2016.07.389 ISSN: 1877-0509
  • S. Behera and S. Nandkeolyar, “Analysis of isolated hybrid system for power supply to a remote island,” Procedia Energy (Elsevier), vol. 117, pp. 1040-1046, 2017. (UGC/Scopus) DOI: https://doi.org/10.1016/j.egypro.2017.05.226 ISSN: 1876-6102
  • S. Behera and P. K. Muduli, “Remote Control of BLDC Motor,” International Journal of System and Software Engineering (IJSSE), vol. 5, no. 1, pp.1-7, 2017. ISSN: 2321-6107
  • S. Behera, “Estimation of PV fed emergency message display system mounted on LED street light pole,” International Journal for Science and Advance Research in Technology (IJSART), vol. 3, no.10, pp. 684-690, 2017. (UGC) DOI: https://ijsart.com/Home/IssueDetail/17695 ISSN: 2395-1052
  • S. Behera and M.C.P. Sahoo, ”Stability Improvement of Isolated Wind-Diesel System with Optimized STATCOM Controller,” International Journal of Control and Automation, SERSC publisher, vol. 11, no. 10, pp.71-84, 2018. (Scopus) DOI: http//dx.doi.org/10.14257/ijca.2018.11.10.07 ISSN: 2005-4297
  • S. Behera and M. Jyotiranjan, “Comparative study of different converter with its controller for grid connected WECS with PMSG,” International Journal of Energy Optimization and Engineering, vol.8, no. 2, pp.1-24,2018. (ESCI/ UGC CARE) DOI: 10.4018/IJEOE.2019040101 ISSN: 2160-9543
  • S. Behera, D. Mahanta, O. Anshuman and D. Oram, “Fingerprint Based Vehicle Security and Control,” International Journal of Current Advanced Research (IJCAR), vol.7, no. 10, pp. 10916-10918, 2018. (UGC CARE) DOI: http://dx.doi.org/10.24327/ijcar.2018.10918.1874 ISSN: 2319-6475
  • S Behera, P. K. Muduli, “Remote Speed Control of BLDC Motor with Display,” International Journal of Automation and Smart Technology (AUSMT), vol.8, no. 2, pp.65-71, 2018, (Scopus) DOI: 10.5875/ausmt.v8i2.1458 ISSN: 2223-9766
  • S. Sahu and S. Behera, “Improved pole-placement for adaptive pitch control,” International Journal of Swarm Intelligence (Inderscience), 4(2), pp.111-126, 2019. DOI: https://doi.org/10.1504/IJSI.2019.104087 ISSN: 2049-405X
  • S. Behera, S.K. Behera and B.B. Pati, “Control of DFIG for WECS under disturbances from grid,” Proceedings of Engineering and Technology Innovation (PETI), vol.13, pp.10-19, 2019. (Scopus) DOI: https://core.ac.uk/download/pdf/228834148.pdf ISSN: 2413-7416
  • S. Behera, “A Case Study on Safe Operating Protocol in Two Different Topologies of a Grid-tied PV Plant,” Alternative Energy and Distributed Generation Journal, vol. 1, no. 3—2020, pp.22-29 ISSN: 2643-6981
  • S. Behera, I. Pattnaik and A. Meher, “MPP Tracking of Grid-Integrated PV System Under Partial Shading Using MSCA,” Journal of The Institution of Engineers (India): Series B. vol. 101, no. 4, pp. 389-395, 2020, (Scopus/UGCCare) DOI: https://doi.org/10.1007/s40031-020-00465-6 ISSN: 2250-2114
  • S. Behera, S. Behera, A.K Barisal and P. Sahu, “Dynamic economic emission dispatch of thermal-wind-solar system with constriction factor-based particle swarm optimization algorithm,” World Journal of Engineering, Vol. 18 No. 2, pp. 217-227, 2020. (ESCI/Scopus) DOI: https://doi.org/10.1108/WJE-07-2020-0327 ISSN: 1708-5284
  • S. Behera, S. Behera and A.K. Barisal, “Dynamic Combined Economic Emission Dispatch integrating Plug-in Electric Vehicles and Renewable Energy Sources,” International Journal of Ambient Energy, pp.1-18, 2021. (Scopus) DOI: https://doi.org/10.1080/01430750.2021.1918243 ISSN: 2162-8246
  • S. Sahu and S. Behera, “A review on modern control applications in wind energy conversion system,” Energy & Environment, vol.33, issue 2, pp.1-40, 2022, (SSCI/Scopus) DOI: https://doi.org/10.1177/0958305X21995929 ISSN: 2048-4070 IF 4.2
  • S. Sahu, S. Behera, “Comparison of adaptive pitch control strategies for a wind turbine benchmark model,” World Journal of Engineering. 2022 Apr 1. (ESCI/Scopus) DOI: https://doi.org/10.1108/WJE-07-2021-0450 ISSN: 1708-5284
  • S. Behera, S.S. Bhoi, A. Mishra, S.S. Nayak, S.K. Panda, S.S. Patnaik, “Comparative Study of Convolutional Neural Network and Long Short-Term Memory Network for Solar Irradiance Forecasting,” Journal of Engineering Science and Technology, vol. 17, no. 3, pp.1845-56, 2022. (ESCI/Scopus) https://jestec.taylors.edu.my/Vol%2017%20Issue%203%20June%202022/17_3_17.pdf ISSN: 1823-4690
  • S. Behera and S. Sahoo, “Design of a Pitch Controller for a Wind Turbine Using Hybrid Mean-Variance Mapping Optimization,” ECTI Transactions on Electrical Engineering, Electronics, and Communications, vol.19, no.3, pp. 298-311, 2021. (Scopus) DOI: https://doi.org/10.37936/ecti-eec.2021193.222600 ISSN: 1685-9545
  • S. Sahu and S. Behera, “Self-tuning proportional-derivative pitch control for internal fault-tolerance in wind turbine benchmark,” Australian Journal of Electrical and Electronics Engineering, pp. 1-15, 2022. (Scopus) DOI: https://doi.org/10.1080/1448837X.2022.2125974. ISSN: 2205-362X
  • S. Behera, S. Behera, AK. Barisal, “Dynamic economic emission dispatch including electric vehicles’ demand management and vehicle to grid support considering physical constraints,” Journal of Ambient Intelligence and Humanized Computing. 2023 Jan 30:1-9. (Scopus) DOI: https://doi.org/10.1007/s12652-023-04518-8. ISSN: 1868-5145
  • S. Behera, A.K. Barisal, S. Behera and D.K. Bagal, “Combined Economic Emission Dispatch including Variable Energy Resources,” Current World Environment. vol. 19, no. 2, p.841, 2024. (UGC CARE), DOI: http://dx.doi.org/10.12944/CWE.19.2.26 ISSN: 2320-8031
  • Bhawana Deshmukh, Deepak Kumar Lal, Sandeep Biswal, and Surender Reddy Salkuti “A differential amplitude variation based pilot relaying scheme for microgrid integrated distribution system”, International Journal of Emerging Electric Power Systems (DE GRUYTER Publications), 2024. https://doi.org/10.1515/ijeeps-2023-0444
  • Rampreet Manjhi, Deepak Kumar Lal, Sandeep Biswal, and Almoataz Y. Abdelaziz, "Technical Indices Evaluation of Radial Distribution Network with Optimally Allocated DGs and Capacitors using Golden Jackal Optimization Algorithm", ECTI Transactions on Electrical Engineering, Electronics, and Communications (ECTI-EEC) (ISSN: 1685-9545), Volume 22 (2), pp. 1-13, 2024. https://doi.org/10.37936/ecti-eec.2024222.250677
  • Bhawana Deshmukh, Deepak Kumar Lal, and Sandeep Biswal, "A reconstruction based adaptive fault detection scheme for distribution system containing AC microgrid", International Journal of Electrical Power and Energy Systems (Elsevier Publications), Volume 147, 2023. https://doi.org/10.1016/j.ijepes.2022.108801
  • Deepak Kumar Lal, and Ajit Kumar Barisal, "Combined load frequency and terminal voltage control of power systems using moth flame optimization algorithm", Journal of Electrical Systems and Information Technology (Springer Publications), Volume 6 (8), pp. 1-24, 2019. https://doi:10.1186/s43067-019-0010-3
  • Soudamini Behera, Ajit Kumar Barisal, Nirmalya Dhal, and Deepak Kumar Lal, "Mitigation of power oscillations using hybrid DE-PSO optimization-based SSSC damping controller", Journal of Electrical Systems and Information Technology (Springer Publications), Volume 6 (5), pp. 1-17, 2019. https://doi:10.1186/s43067-019-0007-y
  • Deepak Kumar Lal, A. K. Barisal, and M. Tripathy, “Differential evolution algorithm optimized dual mode load frequency controller for isolated wind-diesel power system with SMES & fuel cell”, Recent Advances in Electrical and Electronic Engineering (Bentham Science Publications), Volume 12, Issue 1, pp.50-60, 2019. https://doi.org/10.2174/2352096511666180411150820
  • Deepak Kumar Lal, and Ajit Kumar Barisal, "Grasshopper algorithm optimized fractional order fuzzy PID frequency controller for hybrid power systems", Recent Advances in Electrical and Electronic Engineering (Bentham Science Publications), Volume 12, Issue 6, pp.517 - 529, 2019. https://doi.org/10.2174/2352096511666180717142058
  • Deepak Kumar Lal, A. K. Barisal, and M. Tripathy, "Load Frequency Control of Multi Source Multi-Area Nonlinear Power System with DE-PSO Optimized Fuzzy PID Controller in Coordination with SSSC and RFB", International Journal of Control and Automation (SERSC Australia Publications), Volume 11, Issue 7, pp. 61-80, 2018.https://doi: http//dx.doi.org/10.14257/ijca.2018.11.7.06
  • Ajit Kumar Barisal, and Deepak Kumar Lal, "Application of Moth Flame Optimization Algorithm for AGC of Multi-Area Interconnected Power Systems", International Journal of Energy Optimization and Engineering (IGI Global Publication), Volume 7, Issue 1, pp. 22-49, 2018.https://doi: 10.4018/IJEOE.2018010102
  • Deepak Kumar Lal, and A. K. Barisal, "Load Frequency Control of AC Microgrid Interconnected Thermal Power System", IOP Conf. Series: Materials Science and Engineering, Volume 225, 2017.https://doi: 10.1088/1757-899X/225/1/012090
  • Bimalesh Chandra Rout, Deepak Kumar Lal, and A. K. Barisal, "Control of period doubling bifurcation in an SMIB power system using adaptive controller based on LaSalle's invariant principle", Cogent Engineering (Taylor & Francis Publication), Volume 4, 2017.https://doi: 10.1080/23311916.2017.1362804
  • Deepak Kumar Lal, and A. K. Barisal, "Comparative performances evaluation of FACTS devices on AGC with diverse sources of energy generation and SMES", Cogent Engineering (Taylor & Francis Publication), Volume 4, 2017.https://doi: 10.1080/23311916.2017.1318466
  • Deepak Kumar Lal, A. K. Barisal and M. Tripathy, "Grey wolf optimizer algorithm based Fuzzy PID controller for AGC of multi-area power system with TCPS", Procedia Computer Science (Elsevier Publication) , Volume 92, 2016, pp. 99-105.https://doi: 10.1016/j.procs.2016.07.329
  • Prasanna Kumar Biswal, and Deepak Kumar Lal and Bidyadhar Rout, "Distributed Generation: Benefits, Issues and Challenges", Grenze Inernational Journal of Engineering and Technology, Volume 1, Issue 1, 2015, pp. 30-36.
  • Deepak Kumar Lal, and Prasanna Kumar Biswal, "Distributed Generation Allocation and Sizing in Radial Distribution System using Firefly Optimization Algorithm", International Journal of Engineering Research (IJER), Volume 4, Special Issue 1, 2015, pp. 19-24.
  • Deepak Kumar Lal, Bibhuti Bhusan Dash, and A. K. Akella, "Optimization of PV/Wind/Micro-Hydro/Diesel Hybrid Power System in HOMER for the Study Area", International Journal on Electrical Engineering and Informatics, Volume 3, Number 3, 2011, pp. 307-325.https://doi: 10.15676/ijeei.2011.3.3.4
  • Deepak Kumar Lal, and K. S. Swarup, "Modeling and Simulation of Chaotic Phenomena in Electrical Power Systems", Applied Soft Computing Journal (Elsevier Publication), Volume 11, Issue 1, January 2011, pp. 103-110.https://doi: 10.1016/j.asoc.2009.11.001
  • <strong>SarmilaGarnaik</strong>, Avinash Kumar, Gayadhar Pradhan, KabirajSethi; An efficient approach for detecting vowel onset & offset points in speech signal; International Journal of Speech Technology, 2020; pp. 643-651.
  • <strong>SarmilaGarnaik</strong>,Gayadhar Pradhan, KabirajSethi; An approach for reducing speech induced mismatches to detect key words in children’s speech; Multimedia tools and application, 2021
  • <strong>S. Garnaik</strong>, N. Srinivas, G. Pradhan; Detection of vowels in continuous speech using variation of short-term magnitude spectra, In IEEE region 10 conference (TENCON), Kochi, Kerla, India, 2019.
  • A. Kumar, S. Shahnawazuddin, <strong>S. Garnaik</strong>, I.C. Yadav, G. Pradhan; Detection of vowels in speech signals degraded by speech-like noise; In National Conference on Communiction, IEEE, IIScBenagaluru, 2019.
  • A. Das, <strong>S. Garnaik</strong>; Discrete Fourier Transform based vowel onset point detection using spectral peaks energy; In 3rd International Conference on Electronics, Communication &Aerospace Engineering, IEEE, Coimbatore, 2019.
  • S. Nayak, <strong>S. Garnaik</strong>, S.K.Nayak, D. Panigrahi, K. Pal; Study of the effect of a patriotic song on autonomic nervous system and heart using ECG signal analysis; In 2ndInternational Conference on Man And Machine Interfacing, IEEE, IIT, Bhubaneswar, 2017,
  • N. C. Rout, <strong>S. Garnaik</strong>, K. Sethi; A comparison study of signal processing tools for denoising of Electrocardiogram signal; In International Conference on Innovations in Control, Communication and Information systems, IEEE, Greater Noida, India, 2017.
  • B. Meher, S. Agrawal, R. Panda, <strong>L. Dora</strong>, and A. Abraham, Visible and infrared image fusion using an efficient adaptive transition region extraction technique, Engineering Science and Technology an International Journal, 2021.
  • B. Meher, S. Agrawal, R. Panda, <strong>Lingraj Dora</strong>, and A. Abraham, A novel region‐based multimodal image fusion technique using improved dictionary learning. International Journal of Imaging Systems and Technology, 2019, Article in press.
  • S. Agrawal, R. Panda, S. Kumari, <strong>Lingraj Dora</strong>, and A. Abraham, A New Hybrid Multifocus Image Fusion Model Using Single Optimum Gabor, International Information and Engineering Technology Association, Vol. 33 (2), pp. 111 – 118, 2019.
  • <strong>Lingraj Dora</strong>, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, Nested Cross-Validation Based Adaptive Sparse Representation Algorithm and Its Application to Pathological Brain Classification, Expert Systems With Applications, Vol. 114, pp. 313 - 321, 2018.
  • <strong>Lingraj Dora</strong>, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, State of the Arts Methods for Brain Tissue Segmentation: A Review, IEEE Reviews in Biomedical Engineering, Vol. 10, pp. 235 - 249, 2017.
  • <strong>Lingraj Dora</strong>, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, Optimal Breast Cancer Classification Using Gauss-Newton Representation Based Algorithm, Expert Systems With Applications, Vol. 85, pp. 134 - 145, 2017.
  • <strong>Lingraj Dora</strong>, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, An Evolutionary Single Gabor Kernel Based Filter Approach to Face Recognition, Engineering Applications of Artificial Intelligence, Vol. 62, pp. 286 - 301, 2017.
  • Sanjay Agrawal, Rutuparna Panda and <strong>Lingraj Dora</strong>, A Study on Fuzzy Clustering for Magnetic Resonance Brain Image Segmentation Using Soft Computing Approaches, Applied Soft Computing, Vol. 24, pp. 522 - 533, 2014.
  • Pranab Kumar Mishro, Sanjay Agrawal, <strong>Lingraj Dora</strong> and Rutuparna Panda, A Fuzzy C-Means Clustering Approach to HMRF-EM Model for MRI Brain Tissue Segmentation, In 6th International conference on CERA, IIT Roorkee, India, 2017.
  • <strong><strong>Lingraj Dora</strong></strong> and Nurusingha Prasad Rath, Face Recognition by Regularized-LDA Using PRM, In IEEE International Conference on Advances in Recent Technologies in Communication & Computing, Kerala, India, 2010.
  • Performance Improvement of Electric Power Distribution System Using DG, M Mishra, PK Modi ,Distributed Generation & Alternative Energy Journal 31 (4), 50-68
  • A hybrid islanding detection method using wavelet transform for hybrid systems with zero non-detection zone, M Mishra, BB Pati, World Journal of Engineering
  • A hybrid IDM using wavelet transform for a synchronous generator-based RES with zero non-detection zone, M Mishra, BB Pati, AIMS Electronics & Electrical Engineering 8 (1)
  • . K. K. Baral,P. C. Nayak,B. Mohanty,A. K. Barisal, “Improved frequency regulation of dual-area hybrid power system with the in?uence of energy storage devices” ElectricalEngineering https://doi.org/10.1007/s00202-024-02670-8
  • B. V. S. Acharyulu·Simhadri K.S,·B Mohanty, “Greenan aconda optimized DRN controller for automaticgeneration control of two-area interconnected wind–solar–tidal system” Electrical Engineering https://doi.org/10.1007/s00202-023-02151-4
  • G. R Biswal, B. Mohanty, “Frequency and voltage stability of multi microgrid system using 2-DOF TIDF FUZZY controller” smart science https://doi.org/10.1080/23080477.2023.2297550
  • KK Baral, PC Sahu, AK Barisal, B Mohanty, Combined analysis on AGC and ELD of a hybrid power system with D-WCA designed Gaussian type-2 fuzzy controller, Evolving Systems 14 (2), 263-280
  • K. S. Simhadri, B. Mohanty, and S. K. Panda, “Comparative performance analysis of 2DOF state feedback controller for automatic generation control using whale optimization algorithm,” Optim Control Appl Methods, vol. 40, no. 1, 2019, doi: 10.1002/oca.2462
  • 6. P. R. Sahu, K.S Simhadri, B. Mohanty, P. K. Hota, A. Y Abdelaziz, F. Albalawi, S. SM Ghoneim, M. Elsisi, Effective load frequency control of power system with two-degree freedom tilt-integral-derivative based on whale optimization algorithm, Sustainability 15 (2), 1515
  • 7. R. A. Turky, R. Pugazhendhi, B. Mohanty, R. M. Elavarasan , H. M. Hasanien , E. Devaraj, Parameters Identification of Proton Exchange Membrane Fuel Cell Model Based on the Lightning Search Algorithm, Energies 15 (21), 7893
  • 8. S. Patel, B. Mohanty, and K. S. Simhadri, “Frequency Stability Analysis of Power System Using Competition Over Resources Technique Optimized PIDA Controller,” Iranian Journal of Science and Technology - Transactions of Electrical Engineering, vol. 46, no. 1, 2022, doi: 10.1007/s40998-021-00460-7.
  • 9. P. K. Hota and B. Mohanty, “Overload Alleviation And Determination of Cost of Rescheduling In An Open Acess Power System,” International Journal of Power System Operation and Energy Management, 2012, doi: 10.47893/ijpsoem.2012.1042.
  • S. Panda, B. Mohanty, and P. K. Hota, “Hybrid BFOA-PSO algorithm for automatic generation control of linear and nonlinear interconnected power systems,” Applied Soft Computing Journal, vol. 13, no. 12, 2013, doi: 10.1016/j.asoc.2013.07.021.
  • B. V. S. Acharyulu, P. K. Hota, and B. Mohanty, “Automatic generation control of multi-area solar-thermal power system using fruit-fly optimization algorithm,” International Journal of Engineering and Technology(UAE), vol. 7, no. 4, 2018, doi: 10.14419/ijet.v7i4.5.20009.
  • B. V. S. Acharyulu, B. Mohanty, and P. K. Hota, “Analysis of moth flame optimization optimized cascade proportional-integral-proportional-derivative controller with filter for automatic generation control system incorporating solar thermal power plant,” Optim Control Appl Methods, vol. 41, no. 3, 2020, doi: 10.1002/oca.2582.
  • B. V. S. Acharyulu, P. K. Hota, and B. Mohanty, “CLSA-MRPID controller for automatic generation control of a three-area hybrid system,” Energy Systems, vol. 11, no. 1, 2020, doi: 10.1007/s12667-018-0305-9.
  • B. Mohanty, B. V. S. Acharyulu, and P. K. Hota, “Moth-flame optimization algorithm optimized dual-mode controller for multiarea hybrid sources AGC system,” Optim Control Appl Methods, vol. 39, no. 2, 2018, doi: 10.1002/oca.2373
  • B. Mohanty, “Performance analysis of moth flame optimization algorithm for AGC system,” International Journal of Modelling and Simulation, vol. 39, no. 2, 2019, doi: 10.1080/02286203.2018.1476799
  • K. S. Simhadri and B. Mohanty, “Performance analysis of dual-mode PI controller using quasi-oppositional whale optimization algorithm for load frequency control,” International Transactions on Electrical Energy Systems, vol. 30, no. 1, 2020, doi: 10.1002/2050-7038.12159.
  • B. Mohanty and P. K. Hota, “Comparative performance analysis of fruit fly optimisation algorithm for multi-area multisource automatic generation control under deregulated environment,” IET Generation, Transmission and Distribution, vol. 9, no. 14, 2015, doi: 10.1049/iet-gtd.2015.0284.
  • 20. S. Patel, B. Mohanty, and H. M. Hasanien, “Competition over resources optimized fuzzy TIDF controller for frequency stabilization of hybrid micro-grid system,” International Transactions on Electrical Energy Systems, vol. 30, no. 9, 2020, doi: 10.1002/2050-7038.12513.
  • B. Mohanty, “Hybrid flower pollination and pattern search algorithm optimized sliding mode controller for deregulated AGC system,” J Ambient Intell Humaniz Comput, vol. 11, no. 2, 2020, doi: 10.1007/s12652-019-01348-5.
  • B. V. S. Acharyulu, B. Mohanty, and P. K. Hota, “Performance analysis of a cascade controller for conventional and deregulated power systems,” International Journal of Modelling and Simulation, vol. 40, no. 4, 2020, doi: 10.1080/02286203.2019.1610690.
  • B. Mohanty and P. K. Hota, “A hybrid chemical reaction-particle swarm optimisation technique for automatic generation control,” Journal of Electrical Systems and Information Technology, vol. 5, no. 2, 2018, doi: 10.1016/j.jesit.2017.04.001.
  • P. K. Hota and B. Mohanty, “Automatic generation control of multi source power generation under deregulated environment,” International Journal of Electrical Power and Energy Systems, vol. 75, 2016, doi: 10.1016/j.ijepes.2015.09.003.
  • K. S. Simhadri, B. Mohanty, and S. K. Panda, “Comparative performance analysis of 2DOF state feedback controller for automatic generation control using whale optimization algorithm,” Optim Control Appl Methods, vol. 40, no. 1, 2019, doi: 10.1002/oca.2462
  • B. Mohanty and S. Tripathy, “A teaching learning based optimization technique for optimal location and size of DG in distribution network,” Journal of Electrical Systems and Information Technology, vol. 3, no. 1, 2016, doi: 10.1016/j.jesit.2015.11.007.
  • P.K.Hota, B.Mohanty, Congestion management through differential evolution based optimal rescheduling of generators, The institute of engineers (India), 2012, 53, pp-339-346.
  • P.K.Hota, B.Mohanty, An auction based dispatch algorithm for deregulated power system, The institute of Engineers(India), 2013, 54, pp-181-188.
  • P.K.Hota, B.Mohanty, Overload alleviation and determination of cost of rescheduling in an open acess power system, international journal of power system operation and energy management, 2012, 1(3), pp. 25-29.
  • P. K. Hota &amp; Banaja Mohanty, &ldquo;Bacterial foraging optimization algorithm based interconnected hydro-thermal AGC system with GRC and TCPS&rdquo;, Annual Journal of the Odisha Engineers&rsquo; Forum, Vertex-2013, Vol. 2, pp 26-32.
  • A.K.Pradhan, A. Routray ,Banaja Mohanty, Maximum efficiency of flexible AC transmission system, international journal of  electric power and energy system, Elsevier Science , vol. 28 , 2006,pp-581-588.
  • S.panda, B.Mohanty, P.K.Hota, &ldquo;Hybrid BFOA-PSO algorithm for automatic generation control of linear and nonlinear interconnected power systems&rdquo;, Applied Soft Computing , Elsevier Science,  Vol. 13 (12), 2013,pp 4718-4730.
  • B Mohanty, S Panda, P K Hota, &ldquo;Controller parameters tuning of differential evolution algorithm and its application to load frequency control of multi-source power system&rdquo;, International Journal of Electrical  Power and Energy System, Elsevier Science, Vol. 54, 2014, pp 77-84.
  • B&nbsp;Mohanty, S Panda, PK.Hota, &ldquo;Differential evolution algorithm based automatic generation control for interconnected power system with governor dead-band non-linearity&rdquo; Alexandria ENGG journal, Elsevier Science ,Vol 53(3),2014,pp-537-552.
  • B.Mohanty, P.K. Hota, &ldquo;Nonlinear load frequency control of interconnected hydro-thermal system using differential evolution technique&rdquo; International Journal of Electrical, Computer, Electronics and Communication Engineering (WASET), Vol.8(2), 2014, pp 460-67.
  • B.Mohanty, P.K.Hota, &ldquo;Particle Swarm Optimization Based Interconnected Hydro-Thermal AGC System Considering GRC and TCPS&rdquo; International Journal of Electrical, Computer, Electronics and Communication Engineering (WASET), Vol:8, No:7, 2014.
  • B.Mohanty, &ldquo;TLBO optimized sliding mode controller for multi-area multi-source nonlinear interconnected AGC system&rdquo; Electrical Power and Energy Systems 73 (2015) 872–881.
  • A Small SCADA of Energy Management System Using WBEM. RAMPS -2012, VSSUT, India.
  • System resource accounting in a Heterogeneous and Distributed Computing environment. International conference IEEE High performance Computing conference 1997, Bangalore, INDIA.
  • Universal Simplest possible PLC using Personal Computer. IJACSA International journal of Advanced Computer Science and Applications, Vol II, No I, 2011.
  • Gantayat, Abhisek & Kant, Kamal & Behera, Santi. (2018). Renewable electrical energy sources in northern and southern region of India:-an overview of installation, potential and initiatives. International Journal of Engineering and Technology. 8. 861-863.
  • International Journals 2 ( Nos. with details of all publications be given) Santi Behera, M. Tripathy, and J. K. Satapathy "Optimal Placement and Sizing of SVC for Load Margin Improvement Using BF Algorithm," World Academy of Science,Engineering and Technology, International Journal of Electrical, Computer, Energetic,Electronic and Communication Engineering, Vol. 8, No.10, pp. 1653-1658, 2014.
  • Santi Behera, M. Tripathy, and J. K. Satapathy, “A novel approach for voltage secure operation using probabilistic Neural Network in Transmission Network, ELSEVIER, Journal of Electrical Systems and Information Technology vol.3. pp. 141-150, 2016.
  • BK Panigrahi, R. Panda and S. Behera, "Scale frequency analysis of power quality disturbances", Iranian Journal of Electrical and Computer Engineering, Vol. 3, No. 2, Summer-fall 2004, pp.126-131
  • Dillip Kumar Sahoo,<strong> R.K.Sahu,</strong> G.T. Chandra Sekhar and S. Panda &ldquo;A novel modified differential evolution algorithm optimized fuzzy proportional integral derivative controller for load frequency control with thyristor controlled series compensator&rdquo; Journal of Electrical System and Information Technology (<strong>Elsevier</strong>),  (Article in press).
  • <strong>R.K.Sahu</strong>, S. Panda, A. Biswal and G.T. Chandra Sekhar (2016) “Design and analysis of tilt integral derivative controller with filter for load frequency control of multi - area interconnected power systems” ISA Transactions (Elsevier), Vol. 61, pp. 251 - 264. <strong>(Impact Factor: 3.394).</strong>
  • <strong>R.K.Sahu,</strong> S. Panda, U. K. Rout and D K Sahoo (<strong>2016</strong>) “Teaching learning based optimization algorithm for automatic generation control of power system using 2 - DOF PID controller” International Journal of Electrical Power and Energy Systems (Elsevier), Vol. 77, pp. 287 - 301. <strong>(Impact Factor: 3.289).</strong>
  • <strong>R.K. Sahu,</strong> G.T. Chandra Sekhar and Sidhartha Panda (2016)  &ldquo;Automatic generation control of multi - area power systems with diverse energy sources using Teaching Learning Based Optimization algorithm&rdquo; Engineering Science and Technology: an International Journal (<strong>Elsevier</strong>), Vol. 19, No.1, pp. 113 - 134.
  • G.T.Chandra Sekhar, <strong>R.K.Sahu</strong> and S.Panda  “Firefly Algorithm Optimized PID Controller for Automatic Generation Control with Redox Flow Battery” International Journal of Computational Systems Engineering <strong>(Inderscience),</strong> Vol. 3, Nos. 1/2, pp. 48-57.
  • P.C.Pradhan,<strong> R.K. Sahu </strong>and Sidhartha Panda (2016) &ldquo;Firefly algorithm optimized fuzzy PID controller for AGC of multi area multi source power systems with UPFC and SMES&rdquo; Engineering Science and Technology: an International Journal (<strong>Elsevier</strong>), Vol. 19, No.1, pp. 338 - 354.
  • G.T. Chandra Sekhar, <strong>R.K. Sahu</strong>, A.K. Baliarsingh and Sidhartha Panda (2016)  “Load frequency control of power system under deregulated environment using optimal firefly algorithm” International Journal of Electrical Power and Energy Systems (<strong>Elsevier</strong>), Vol. 74, pp. 195 - 211. <strong> (Impact Factor: 3.289)</strong>.
  • G.T. Chandra Sekhar, <strong>R.K.Sahu</strong> and S. Panda (2015) “Application of Firefly Algorithm for AGC Under Deregulated Power System” Volume 31 of  the series Smart Innovation, Systems and Technologies (<strong>Springer)</strong>, Vol.1, pp. 677 - 687. <strong>DOI 10.1007/978 - 81 - 322 - 2205 - 7_62</strong>
  • G.T. Chandra Sekhar, <strong>R.K.Sahu</strong> and S. Panda (2015) &ldquo;DE Optimized PID Controller with Derivative Filter for AGC of Interconnected Restructured Power System&rdquo; Volume 411 of the series Advances in Intelligent Systems and Computing (<strong>Springer)</strong>, Vol.2, pp. 395 - 403. <strong>DOI 10.1007/978 - 81 - 322 - 2731 - 1_37</strong>
  • <strong>R.K.Sahu</strong>, S. Panda and<strong> </strong>Saroj Padhan (2015) “A hybrid firefly algorithm and pattern search technique for automatic generation control of multi<strong> </strong>area power systems” International Journal of Electrical Power and Energy Systems (<strong>Elsevier</strong>), Vol. 64, pp.9 - 23.<strong> (Impact Factor: 3.289)</strong>.
  • <strong>R.K.Sahu</strong>, S. Panda and<strong> </strong>G.T. Chandra Sekhar (2015) “A novel hybrid PSO - PS optimized fuzzy PI controller for AGC in multi area interconnected power<strong> </strong>systems” International Journal of Electrical Power and Energy Systems (<strong>Elsevier</strong>), Vol. 64, pp. 880 - 893. (<strong>(Impact Factor: 3.289)</strong>.
  • <strong>R.K.Sahu,</strong> G.T. Chandra Sekhar and S. Panda (2015) &ldquo;DE optimized fuzzy PID controller with derivative filter for LFC of multi source power system in deregulated environment&rdquo; Ain Shams Engineering Journal (<strong>Elsevier</strong>), Vol. 6, pp. 511 - 530, <strong>(Source Normalized Impact per Paper (SNIP): 1.027</strong>).
  • <strong>R.K.Sahu</strong> S. Panda and Saroj Padhan (2015) “A novel hybrid gravitational search and pattern search algorithm for load frequency control of nonlinear power system” Applied Soft Computing (<strong>Elsevier</strong>), Vol. 29, pp. 310 - 327. <strong>(Impact Factor: 3.541)</strong>.
  • <strong>R.K.Sahu</strong> S. Panda and P.C. Pradhan (2015) “Design and analysis of hybrid firefly algorithm - pattern search based fuzzy PID controller for LFC<strong> </strong>of multi area power systems” International Journal of Electrical Power and Energy Systems (<strong>Elsevier</strong>), Vol. 69, pp. 200–212. (<strong>(Impact Factor: 3.289)</strong>.
  • <strong>R.K.Sahu,</strong> G.T. Chandra Sekhar and S. Panda (2015) &ldquo;A hybrid DE - PS algorithm for load frequency control under deregulated power system with UPFC and RFB</a> &rdquo; Ain Shams Engineering Journal (<strong>Elsevier</strong>), Vol. 6, No.3, pp. 893 - 911. <strong>(Source Normalized Impact per Paper (SNIP): 1.027</strong>).
  • G.T. Chandra Sekhar,<strong> R.K.Sahu</strong> and S. Panda (2015) &ldquo;AGC of a multi - area power system under deregulated environment using redox flow batteries and interline power flow controller&rdquo; Engineering Science and Technology: an International Journal (<strong>Elsevier</strong>), Vol. 18,No.4, pp. 555 - 578.
  • Saroj Padhan, <strong>R.K.Sahu</strong> and S. Panda (2014) &ldquo;Automatic generation control with thyristor controlled series<strong> </strong>compensator including superconducting magnetic energy storage units&rdquo; Ain Shams Engineering Journal (<strong>Elsevier</strong>), Vol. 5, pp.759–774. <strong>(Source Normalized Impact per Paper (SNIP): 1.027</strong>).
  • <strong>R.K.Sahu</strong>, S. Panda and<strong> </strong>Saroj Padhan (2014) &ldquo;Optimal gravitational search algorithm for automatic generation control of interconnected power systems&rdquo; Ain Shams Engineering Journal (<strong>Elsevier</strong>), Vol. 5, pp.721–733. <strong>(Source Normalized Impact per Paper (SNIP): 1.027</strong>).
  • Saroj Padhan,<strong> R.K. Sahu</strong> and S. Panda (2014) “Application of firefly algorithm for load frequency control of multi area interconnected power system” Electric Power Components and Systems (<strong>Taylor & Francis</strong>), Vol. 42, No. 13, pp. 1419–1430.<strong> (Impact Factor: 1.22).</strong>
  • <strong>R.K. Sahu</strong>, S. Panda and Saroj Padhan (2014) “A novel hybrid DEPS optimized fuzzy PI/PID controller for load frequency control of multi area interconnected power systems” Journal of Process Control (<strong>Elsevier</strong>), Vol. 24, No. 10, pp.1596–1608. <strong>(Impact Factor: 2.700)..</strong>
  • <strong>R.K.Sahu,</strong> S. Panda, U.K.Rout and P Raul (2013) &ldquo;Application of Gravitational Search Algorithm for Load Frequency Control of Multi Area Power System&rdquo; Journal ofBioinformatics and Intelligent Control, Vol.2,No.3, pp.200–210.
  • U.K.Rout, <strong>R.K.Sahu</strong> and S. Panda (2013) &ldquo;Design and analysis of differential evolution algorithm based automatic generation control for interconnected power system&rdquo; Ain Shams Engineering Journal (<strong>Elsevier</strong>), Vol.4, No.3, pp.409–421. <strong>(Source Normalized Impact per Paper (SNIP): 1.027</strong>).
  • <strong>R. K. Sahu</strong>, S.Panda and U.K.Rout (2013) “DE optimized parallel 2 - DOF PID controller for load frequency control of power system with governor dead - band nonlinearity” International Journal of Electrical Power and Energy Systems <strong>(Elsevier),</strong>Vol. 49 , pp.19–33.<strong> </strong>(<strong>(Impact Factor: 3.289)</strong>.
  • S. Panda and<strong> R.K.Sahu </strong>(2009) &ldquo;Modelling, Simulation and Optimal Design of a TCSC - based Controller in a Power System&rdquo; International Journal Engineering Systems Modelling and Simulation <strong>(Inderscience),</strong> Vol.01, No.04, pp.222 - 230.
  • R.Sarathi, <strong>R.K.Sahu</strong> and<strong> </strong>M.G.Danikas (<strong>2009</strong>) “Understanding the Mechanical Properties of epoxy nanocomposite insulating materials" Journal of Electrical Engineering, Vol.60, No.06, pp. 358 - 361.<strong> (Impact Factor: 0.524)</strong>.
  • R.Sarathi, <strong>R.K.Sahu </strong>and T.Tanaka (<strong>2008</strong>) “Understanding the hydrophobic characteristics of Epoxy   Nanocomposites using wavelet and fractal technique” <strong>IEEE Trans</strong>. On Dielectrics and Electrical Insulation, Vol.15, No.01, pp.178 - 186.<strong> . (Impact Factor: 2.115)</strong>.
  • R.Sarathi, <strong>R.K.Sahu </strong>and P.Rajesh Kumar (<strong>2007</strong>) “Electrical, Mechanical and Thermal properties of Epoxy Nanocomposites” International Journal of Materials Science and Engineering: A <strong>(Elsevier),</strong> Vol. 445 - 446, pp.567 - 578.<strong> (Impact Factor: 3.094)</strong>.
  • R.Sarathi, P.Rajesh Kumar and <strong>R.K.Sahu</strong> (<strong>2007</strong>), “Analysis of Surface Degradation of Epoxy Nanocomposite due to tracking under AC and DC voltages” Polymer Degradation  and Stability<strong>(Elsevier),</strong> Vol. 92, No.4, pp.560 - 568.<strong> (Impact Factor: 3.386).</strong>.
  • R.Sarathi, <strong>R.K.Sahu</strong> and P.Rajesh Kumar,T.Tanaka (<strong>2006</strong>), &ldquo;Understanding the performance of Epoxy Nanocomposites - A Physico - Chemical Approach&rdquo; IEEJ Trans. on Fundamentals and Materials,Vol.126, No.11, pp.1112 - 1120.
  • G. Biswal, N. Behera, R.N. Mohapatra and S.K. Padhan, A pair of Mond–Weir type third order symmetric duality, Journal of Applied Mathematics and Computing, 69 (2023) 3391-3402.
  • A. Patnaik, S.K. Padhan and R.N. Mohapatra, Sufficient conditions for extremum of fractional variational problems, RAIRO - Operations Research, 56 (2022) 637-648.
  • S. Gadtia and S.K. Padhan, A note on machine method for root extraction, Boletim da Sociedade Paranaense de Matemática, 40 , (2022) 1-6.
  • G. Biswal, N. Behera, S.K. Padhan and R.N. Mohapatra, Third order symmetric duality in variational problems, Pan-American Mathematical Journal, 4 , (2021) 19-30.
  • P.K. Behera, S.K. Padhan and C. Nahak, Duality of control problems in general Banach spaces, International Journal of Operational Research, 42 , (2021) 358-370.
  • S. Gadtia, S.K. Padhan and B. Bhoi, Square root formulae in the ?ulbas?tras and Bakhshãl? manuscript, Journal of Interdisciplinary Mathematics, 20 , (2020) 1-10.
  • J. Dasmahapatra and S.K. Padhan, Second order duality for mathematical programming involving n-set functions, Bol. Soc. Paran. Mat., 37 (2019) 37-54.
  • G. V. V. Jagannadha Rao, S. K. Padhan and M. Postolache, Application of Fixed Point Results on Rational F-Contraction Mappings to Solve Boundary Value Problems, Symmetry 11 (2019) 1-20.
  • <strong>S.K. Padhan</strong> and C. Nahak, Symmetric duality with generalized invexity in variational problems, Journal of Orissa Mathematical Society, 27 (2008), 81-86.
  • <strong>S.K. Padhan</strong>, Duality of variational problems with a new approach, <i>RAIRO- Oper. Res</i>., 52 (2018) 79-93. I.F. 0.55
  • <strong>S.K. Padhan</strong> and C. Nahak, Third order duality in nonlinear programming problems, 4OR. <i>A Quarterly Journal of Operations Research</i>, 15 (2017)93-105. I.F. 1.6
  • <strong>S. K. Padhan</strong>, G.V.V. Jagannadha Rao, Hemant Kumar Nashine and R. P. Agarwal, Some fixed point results for (β-ψ_1-ψ_2)-contractive conditions in ordered b-metric- like spaces, <i>Filomat</i>, 31(14) (2017), 4587-4612. I.F. 0.69
  • <strong>S.K. Padhan</strong> and C. Nahak, Higher-order symmetric duality in multiobjective Programming problems under higher-order invexity, <i>Appl. Math. Comput.</i>, 5 (2011) 1705-1712. I.F. 1.738
  • <strong>S.K. Padhan</strong> and C. Nahak, Second order duality for the variational problems under <i> invexity, Comput. Math. Appl</i>., 60 (2010) 3072-3081. I.F. 1.531
  • J. Dasmahapatra and <strong>S.K. Padhan</strong>, Second order duality for mathematical programming involving n-set functions, <i>Bol. Soc. Paran. Mat.</i>, 37 (2019) 37- 54
  • P.K. Behera, <strong>S.K. Padhan </strong>and R.N. Mohapatra, On variational control problems in Banach Spaces, <i>Panamer. Math. J.</i>, 28 (2018) 1-18.
  • <strong>S.K. Padhan</strong>, S. Gadtia and B. Bhoi, FPGA based implementation for extracting the roots of real number, <i>Alexandria Engineering Journal</i>, 55 (2017) 2849-2854.
  • <strong>S.K. Padhan</strong>, S. Gadtia and A.K. Pattanaik, Remarks on Heron’s cubic root iteration formula, <i>Bol. Soc. Paran. Mat.</i>, 35 (2017) 1-8.
  • A.K. Bhurjee and <strong>S.K. Padhan</strong>, Optimality conditions and duality results for non-differentiable interval optimization problems, <i>Journal of Applied Mathematics and Computing</i>, 50 (2016) 59-71.
  • <strong>S.K. Padhan</strong> and C. Nahak, Higher-order symmetric duality with higher-order generalized invexity, <i>J. Appl. Math. Comput.</i> 36 (2015) 1334-1341.
  • <strong>S.K. Padhan</strong> and C. Nahak, Higher-order generalized invexity in variational problems, Math. Meth. Appl. Sci., 36 (11) (2013) 1334-1341. I.F. 1.017
  • <strong>S.K. Padhan</strong> and C. Nahak, Second and higher order generalized invexity and duality in mathematical programming, Int. J. Math. Oper. Res. 5(2) (2013), 170-182.
  • <strong>S.K. Padhan</strong>, C. Nahak and R.N. Mohapatra, Second and higher order duality in Banach space under invexity, Nonlinear Anal. Hybrid Syst., 5 (2011), 457-466. I.F. 3.963
  • Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications, Fibers and Polymers, Pages 1-19
  • Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Effect of pistachio shell particles on mechanical and erosion wear performance of hybrid kenaf/glass polyester composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501231224686
  • Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Punyapriya Mishra, Pratap Chandra Padhi, Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 23977914231217921
  • Dilip K. Sahu, Priyam P. Tripathy, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5)
  • Binita Dash, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, 89(3), 265-281
  • Itishree Rout, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra, Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering & Technologies, 1-20
  • Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Influence of pistachio shell filler addition and interply hybridization on mechanical and thermal performances of polyester composites, Journal of Elastomers & Plastics, 56(2), 169-193
  • Chetana Tripathy, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Padmanav Dash, Punyapriya Mishra, Experimental and numerical evaluation of mechanical performances of hybrid Palmyra-Palm-Leaf-Stalk/Glass fiber reinforced polyester composites, Journal of Elastomers & Plastics, 56(2), 141-168
  • Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material, Transactions of Indian Institute of Metals, 1, 1-10
  • Ajit Kumar Behera, Punyapriya Mishra, Punyatoya Mishra, Chitta Ranjan Deo, Deepak Kumar Mohapatra, Debasish Rout, Effect of impact velocity and impingement angle on the Erosive wear behaviour of ceramic reinforced polymer composites, Transactions of Indian Institute of Metals, 77(2), 371-378
  • Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of Mechanical and Morphological properties of CCTO-BT/epoxy composite, Composite Theory and Practices, 23(3), 123-128
  • Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of frequency dependence properties of CCTO-BT/epoxy composites, Part C: Journal of Mechanical Engineering Science, 238 (6), 2140-2149
  • Chetana Tripathy, Deepak Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Erosive wear study of PPLSF/Glass fiber reinforced hybrid laminates, Journal of Harbin Institute of Technology (New Series)
  • Sabindra Kachhap, Pabitra Kumar Sahu, Punyapriya Mishra, Investigation and optimization of wire EDM process parameters for Al 5454 alloy machining, Materials today proceeding
  • Chandrakanta Mishra, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Kiran Kumar Ekka, Erosion wear behaviour of kenaf/glass hybrid polymer composites. Journal of Harbin Institute of Technology (New Series), 31 (1), 78-89
  • Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Deepak Kumar Mohapatra, Evaluation of dielectric properties of CCTO-BT/epoxy composites for electronic applications. Journal of Harbin Institute of Technology (New Series), 31(1), 69-77
  • Deepak K Mohapatra, Chitta R Deo, Punyapriya Mishra, Kiran K Ekka, Chandrakanta Mishra, “Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221136813
  • Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, “Investigation of glass fiber influence on mechanical characteristics of natural fiber reinforced polyester composites: an experimental and numerical approach”, Composites theory and practice, 22: 3, 123-129
  • Swagatika Mishra, Punyapriya Mishra, “ Synthesis and characterization of CCTO0.5 BT0.5/epoxy hybrid ceramic polymer composite for electronic applications” Materials Today: Proceedings, Volume 67, Part 2, Pages 372-376
  • Narasingh Deep, Punyapriya Mishra, Layatitdev Das, “Application of adaptive neuro-fuzzy inference system (ANFIS) for predicting dielectric characteristics of CNT/PMMA nanocomposites.” Materials Today: Proceedings, 33, 5200-5205
  • Debasmita Pani, Punyapriya Mishra, Study of mechanical properties of natural fiber reinforced hybrid polymer composites, International journal of Advanced Mechanical Engineering, 9(1), 1-6
  • Punyapriya Mishra, Narasingh Deep, Sagarika Pradhan, Vikram G Kamble “Effect of functionalized MWCNT on the mechanical and dielectric properties of PMMA nano composites”, International Journal of Nano Science, 18 (6), 1850035-304
  • Narasingh Deep, Punyapriya Mishra “Fabrication and characterization of thermally conductive PMMA/MWCNT nanocomposites”, Materials Today Proceedings, 5(14), 28328-28336
  • Debasmita Pani, Punyapriya Mishra, Tribological behavior of sponge gourd based hybrid reinforced polymer composite, International Journal of Advanced Mechanical Engineering, 8(1), Special edition, 89-96
  • S N Panda, S.Panda, D.S.Khamari, P.Mishra, “Re-examination for effect of ball race conformity on life of Rolling Element bearing using Metaheuristic, International Journal of Advanced Mechanical Engineering, 8 (1) 285-294
  • Narasingh Deep, Punyapriya Mishra, “Evaluation of mechanical properties of functionalized carbon nano tube reinforced PMMA polymer nanocomposite”, Karbala International Journal of Modern Science, 4(2), 207-215
  • Tanushree Bera, S.K.Acharya, Punyapriya Mishra “Synthesis, mechanical, thermal Properties of carbon black/epoxy composites”, International Journal of Engineering, Science and Technology, 10 (4), 12-20
  • Narasingh Deep, Punyapriya Mishra & Swadhin Kumar Patel, Abrasive wear behavior of graphite reinforced PMMA matrix composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) special issue, 329-334
  • Narasingh Deep, Punyapriya Mishra, Fabrication, Modeling and Analysis of The Erosive Wear Properties of Multi Walled Carbon Nanotube Reinforced PMMA Composite Using Taguchi Approach, Int. J. Recent Sci. Res, 6, 10, 6802-6806
  • Punyapriya Mishra & Tanushree Bera. “Fabrication and characterization of composite using carbon black-waste from petroleum products.” International Journal of Advanced Research (IJAR), Volume 2, Issue 7, 122-130
  • Punyapriya Mishra, “Mechanical behavior of bagasse fiber reinforced epoxy composites at liquid nitrogen temperature”. Journal of Solid waste Technology and Management, Vol. 40, No.3, Page No.197-202
  • Gujjala Raghavendra, S.K.Acharya. C.R.Deo, P.Mishra “Fabrication-modelling and analysis on tribological performance of natural composites using taguchi approach.” Procedia Engineering, Volume 38, p.2635-2644
  • Punyapriya Mishra, “Statistical analysis for the abrasive wear behavior of bagasse fiber reinforced polymer composite”. International Journal of Applied research in Mechanical Engineering (IJARME) Vol. 2, Issue 3, P. 154-158
  • Punyapriya Mishra and S.K.Acharya. “Study on dielectric properties of bagasse fiber reinforced epoxy composite.” Journal of Inventi. Volume 2, No.1
  • Samir Kumar Acharya, Punyapriya Mishra and Suraj Kumar Mehar. “Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite.” Journal of Bioresources. Volume 6, No. 3, pp. 3155-3165
  • Punyapriya Mishra and S.K.Acharya. “Effect of fiber loading on the abrasive wear behaviour of bagasse fiber reinforced epoxy composite.” Journal of Tribology Research, Volume 1, No. 2, pp. 59-64
  • Punyapriya Mishra & S.K.Acharya. “Solid particle erosion of bagasse fiber reinforced epoxy composite.” International Journal of Physical Science, Volume 5, No.2, pp. 109-115
  • Punyapriya Mishra and S.K.Acharya. “Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite.” International Journal of Engineering, Science and Technology, Volume 2, No. 11, pp. 104-112.
  • Dr. S.K.Acharya, P.Mishra, Dr.S.C.Mishra “Effect of environment on the mechanical properties of fly ash – jute – polymer Composite.” Indian Journal of Engineering and Material Science, Volume 15, No. 6, pp. 483-488.
  • P.Mishra & Dr. S.K.Acharya, S.K.Mehar. “The influence of fiber treatment on the performance of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 28, No. 24, pp.3027-3036.
  • P.Mishra & Dr. S.K.Acharya, S.K.Meher, V.Dikshit “Weathering behavior of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 16-17, pp.1839-1846.
  • P.Mishra & Dr. S.K.Acharya, V.Dikshit “Erosive wear behavior of red mud filled metal matrix composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 2, pp.145-152.
  • Sarmistha Panda, Raseswari Pradhan, Bibhuti Bhusan Pati and Sudhir Kumar Sahoo,(2025) “Analysis of LVRT control strategies for grid-tied photovoltaic systemunder symmetrical faults and grid fluctuation conditions” Engineering Research Express,”Iop publishing 7 March (2025) 025304, doi.org/10.1088/2631-8695/adc53c
  • Shaswat Chirantan, and B.B. Pati(2025) "A three-phase induction motor dynamic framework regulated by predictive and intelligent optimizations."ITEGAM-JETIA 11, no. 51, pp.43-55.
  • Mamun Mishra and B. B. Pati (2025), A hybrid islanding detection method using wavelet transform for hybrid systems with zero non-detection zone,World Journal of Engineering, (Emerald Pub)Vol.22, issue-3pp. 627-637. https://doi.org/10.1108/WJE-12-2023-0499.
  • M. Mishra, B.B. Pati(2024), A hybridIDMusing wavelet transformfor asynchronous generator-based RES with zero non-detection zone, AIMS Electronics and Electrical Engineering, 8(1): 146-164.doi:10.3934/electreng.2024006
  • Shaswat Chirantan, and B.B. Pati(2024) "Torque and dq axis current dynamics of an inverter fed induction motor drive that leverages computational intelligent techniques." AIMS Electronics and Electrical Engineering 8, no. 1, pp.28-52.
  • Shaswat Chirantan, and B.B. Pati(2024)"Integration of predictive andcomputational intelligent techniques: A hybrid optimization mechanism forPMSM dynamics reinforcement." AIMS Electronics and Electrical Engineering 8,no.2 :pp.255-281.
  • Biresh Kumar Dakua, B. B. Pati,(2024) “A deterministic design approach of tilt integral derivative controller for integer and fractional-order system with time delay”, Engineering Research Express, IOP Publishing, vol. 6, 035331, 2024, DOI: 10.1088/26318695/ad6ca5.
  • Biresh Kumar Dakua, B. B. Pati,(2024) “A frequency domain-based loop shaping procedure for the parameter estimation of the fractional-order tilt integral derivative controller”, Mathematical Modelling and Control, AIMS Press, vol. 4, issue. 4, pp. 374-389, 2024, DOI: 10.3934/mmc.2024031.
  • R. Pramanik, J. K. Pradhan, and B. B. Pati,(2024) “A Novel PWM Inverter Topology for Intuitive Motion Controls of EV With BLDC Motor,” The International Journal of Integrated Engineering, Vol. 16, No.5, pp.250-264.
  • Biresh Kumar Dakua, B. B. Pati,(2024) “Controllers for Suppression of Limit Cycle in a Plant with Time Delay and Backlash Nonlinearity”, International Journal of Automotive Science and Technology, DergiParkAkademik,vol.8,no. 4, pp. 506-526, DOI:10.29228/ijastech.1471847.
  • Shaswat Chirantan, and B.B. Pati(2024)"Dynamics assessment of an inverter fed induction motor drive by an improved predictive controller leveraging finite control set mechanism." ITEGAM-JETIA 10, no. 47 (2024): pp. 83-94.
  • S. P. Sahoo, B. Das, B. B. Pati,(2024) “A Convolutional Neural Network MachineLearning based Navigation of Underwater Vehicles under Limited Communication” Archives of Control Sciences, vol. 34 (LXX), no. 3, pp. 537-568, Oct. 2024. https://doi.org/10.24425/acs.2024.149671.
  • Ranjan Pramanik, J. K. Pradhan, and B. B. Pati,(2024) “A Novel PWM Inverter Topology for Intuitive Motion Controls of EV With BLDC Motor,” The International Journal of Integrated Engineering, Vol. 16, No. 5, 2024, PP. 250-264,Doi:https://doi.org/10.30880/ijie.2024.16.05.019
  • Ranjan Pramanik and B. B. Pati,(2023) "Modelling and control of a non-isolated half-bridge bidirectional DC-DC converter with an energy management topology applicable with EV/HEV," J. King Saud Univ. – Eng. Sci., vol. 35, pp. 116–122, 2023, doi: 10.1016/j.jksues.2021.03.004.
  • Sarada Prasanna Sahoo, Bikramaditya Das, B.B.Pati, Garcia Marquez, F. P., and Segovia Ramirez, I., (2023) “Hybrid pathplanning using a bionic-inspired optimization algorithm for autonomous underwater vehicles”. Journalof Marine Science and Engineering, 11(4), p. 761.(This article belongs to the Special Issue AI for Navigation and Path Planning of Marine Vehicles).https://doi.org/10.3390/jmse11040761.
  • Sarada Prasanna Sahoo, Bikramaditya Das, B.B.Pati,(2022). “Path planning of auv swarms using a bio-inspiredmulti-agent system”. ECTI Transactions on Electrical Engineering, Electronics, and Communications,20(3), pp. 315–328.
  • Sarada Prasanna Sahoo, Bikramaditya Das, B.B.Pati, (2021) “Path planning of bio-inspired swarm of AUVs usingdistributed path consensus algorithm.”. Journal of Engineering Science & Technology Review, 14(5).
  • Madhusmita Panda, Bikramaditya Das, Bidyadhar Subudhi and B.B.Pati, (2021), “Adaptive fuzzy sliding mode formationcontroller for autonomous underwater vehicles with variable payload”. International Journal ofIntelligent Unmanned Systems, 9(2), pp. 133–166.
  • Madhusmita Panda, BikramadityaDas, and B.B.Pati, (2020) “Global path planning for multiple AUVs using GWO”. Archivesof Control Sciences, (Poland)30(1), pp. 77–100.
  • BikramadityaDas, Bidyadhar Subudhi and B.B.Pati, (2020)“Formation control of underwater vehicles using multiagent system”. Archives of Control Sciences, (Poland) 30.No.2, pp.365-384, DOI-10.24425/acs.2020.133503
  • Rosy Pradhan, S K Majhi, J K Pradhan, B B Pati,(2020) "Optimal fractional order PID controller design using Ant Lion Optimizer", Ain Shams Engineering Journal,June 2020, Elsevier Publication,Vol.11, No.2, pp.281-291, DOI: https://doi.org/10.1016/j.asej.2019.10.005
  • Sasmita Behera, S.K. Behera and B.B. Pati,(2019) “Control of DFIG for WECS under disturbances from GRID”, Proceedings of Engineering and Technology Innovation(PETI), Vol.13, pp.10-19, 2019.
  • Rosy Pradhan, Santosh Kumar Majhi, Bibhuti BhusanPati,(2019) Design of Fractional Order PID Controller for Heat Flow System using Hybrid Particle Swarm Optimization and Gravitational Search Algorithm, International Journal of Computational Intelligence Studies, Inderscience, Vol. 8(1/2), January 2019. DOI:10.1504/IJCISTUDIES.2019.098016
  • Rosy Pradhan and B. B. Pati (2019), "Comparative Performance Evaluation of FOPID controller for Heat Flow System using Evolutionary Algorithm." International Journal of meta-heuristic computing. Vo.10(4), 2019, pp.68-90 DOI:10.4018/IJAMC.201910010.
  • Bidyadhar Rout, and B.B. Pati,(2018) “MFO Optimised Fractional Based Controller on Power System Stability”, Proceedings of Engineering and Technology Innovation(PETI), Vol.8, pp.46-59, 2018.
  • Rosy Pradhan, S.K. Majhi, and B.B. Pati,(2018) "Design of PID controller for Automatic Voltage Regulator System using Ant Lion Optimizer", World Journal of Engineering, Emerald, Vol.15, No.3 pp.373-387, 2018.
  • Bidyadhar Rout, B.B.Pati and S. Panda, (2018)“A hybrid modified differential evolution pattern search approach for SSSC based damping controller design under communication constraints”, Int. J. System Assur. Engg. Manag(Springer), Vol.9, No.4, pp.962-971, Aug.2018.
  • Bidyadhar Rout, B.B.Pati and S.Panda,(2018) “Modified SCA algorithm for SSSC damping Controller design in Power System”, ECTI Transactions on Electrical Engineering, Electronics, and Communications, Vol.16, No.1, pp.46-63, Feb.2018.
  • Rosy Pradhan, S. K. Majhi, J. K. Pradhan, and B. B. Pati,(2018) “Antlion optimizer tuned PID controller based on Bode ideal transfer function for automobile cruise control system,” Journal of Industrial Information Integration, (Elsevier ) vol. 9, pp. 45–52, 2018.
  • Sasmita Behera and B.B. Pati,(2017) “Protection System of a Grid Connected PV System” ELECTRICAL INDIA, Vol. 57 (04) , April, 2017, pp. 72-76.
  • Rosy Pradhan, S. K. Majhi, J. Pradhan, and B. B.Pati,(2017) “Performance Evaluation of PID Controller for an Automobile Cruise Control System using Ant Lion Optimizer”, Engineering Journal (Eng. J.), vol. 21, no. 5, pp. 347-361, Sep. 2017.
  • Bikramaditya Das, Bidydhar Subudhi, and B.B. Pati,(2016) “Coperative formation control of Autonomous underwater vehicles: An Overview”, Int. Jour of Automation and Computing (Springer) Vol.13, No.3, June, 2016 pp. 199-225.
  • Sasmita Behera, B.Subudhi, B.B.Pati,(2016)“Design of PI Controller in Pitch Control of Wind Turbine: A Comparison of PSO and PS Algorithm”, International Journal of Renewable Energy Research, Vol. 6(1), 2016. pp.271-281
  • A.K. Pradhan, B.B. Pati, and Monalisa Biswal,(2017) “Sample based Fault Classification” ELECTRICAL INDIA, Vol. 57 (02) , Feb, 2017, page 34-44.
  • Bikramaditya Das, Bidydhar Subudhi, and B.B. Pati,(2016) “Co-operative control of a team of autonomous underwater vehicles in an obstacle-rich environment” Journal of Marine Engineering & Technology, Vol.15(3), Nov. 2016, pp.135-151.
  • Sasmita Behera, Subham Sahoo and B.B. Pati,(2015), “A review on Optimisation Algorithms and application to Wind Energy Integration to Grid”, Renewable & Sustainable Energy Reviews-Elsiver Sc. Publication (DOI-10.1016/j.rser.2015.03.066.
  • Bikramaditya Das, B.Subudhi, and B.B. Pati,(2015) “Control Coordination of a Team of underwater vehicle”, ELECTRICAL INDIA, Vol. 55 (03) March 2015 page 76-79.
  • Bikramaditya Das, B.Subudhi, and B.B. Pati,(2015) “Co-operative control coordination of a team of underwater vehicles with communication constraints”, Transactions of the Institute of Measurement and Control (Sage Publication), 2015 page 1-19.
  • Bikramaditya Das, B.Subudhi, and B.B. Pati,(2015), “Employing nonlinear observer for formation control of AUVs under communication constraints”, International Journal of Intelligent Unmanned Systems, (Emerald Publication) Vol.3, issue 2/3, pp.122-155, Nov.2015.
  • Bikramaditya Das, B. Subudhi, B. B. Pati,(2014) “Adaptive sliding mode formation control of multiple underwater robots” Archives of Control Sciences,vol.24(LX), no. 4, pp. 515–543, Dec.2014.
  • Rabindra Behera, B.B. Pati and B.P.Panigrahi,(2014) “A Long Term Load Forecasting of anIndian Grid for Power System Planning” J. Inst. Eng. India Ser. B, 95:279-285 DOI 10.1007/s40031-014-0115-y, Springer, Vol.4, 2014 pp.279-285.
  • L. D. Samanta, B.P. Panigrahi and B.B. Pati,,(2014) “A New Approach to Direct Torque Control of Induction Motor Drive with GA Controller for Torque Ripple Reduction” Int. Jour of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Vol.2, Issue-1, JAN.2014, pp.606-615
  • Monalisa.Biswal, B.B. Pati, ,(2013) “Directional relaying for double circuit line with series compensation”, IET Proc. Generation Trans & Distr., Vol. 7, Issue 4,pp. 405-413 , 2013.
  • Monalisa. Biswal, B. B. Pati, and A. K. Pradhan,(2013) “Adaptive distance relay setting for series compensated line,” Int. Journal of Electrical Power and Energy system, Elsevier Science, vol. 52, pp. 198-206, 2013.
  • Monalisa Biswal, and B. B. Pati, (2013) “Distance relay algorithm for thyristor controlled series compensated line”, International Journal of Computer Science System Engineering and Information Technology, vol. 6, no.1, pp. 43-48, Jan-June 2013.
  • L. D. Samanta, B.B. Pati, B.P. Panigrahi, (2013) “Direct Flux and Torque Control of Induction Motor Drive Changing the Hysteresis Band Amplitude” Int. Jour of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Vol.1, Issue-11, Dec.2013, pp.421-424.
  • A.Chatterjee, Loknath Dhall Samanta, and B.B. Pati,(2013) “Direct Torque Control of Induction Motor using Fuzzy Logic Controller for Low Torque Ripple” Asian Resonance, Vol-II, Issue-IV, Oct.2013, pp.7-12.
  • Bikramaditya Das, Ch. S. Das, S.Das, B.Subudhi, B.B. Pati,(2012) “Narrowband Interference Reduction Technique in Impulse Radio (IR) UWB Communication System Coexisting in WPAN and Underwater Environment.”, ICTACT Int. Journal, on Communication Technology, ISSN0976-0091, Vol.3, No.1, Mar 2012 pp.478-487.
  • B.B. Pati, Rabindra Behera, and D.P. Patra, (2012) “Power Quality Improvement for Grid Connected Wind Energy System using STATCOM Control Scheme”, Electrical India, April 2012, pp.24-29.
  • Rabindra Behera, B.P. Panigrahi, and B.B. Pati, (2012) “Economic Load Dispatch problem using modified Genetic Algorithm”, Int. Jour of Scientific and Engineering Research, Vol.3 Issue.5 May 2012, pp.1-6.
  • Rabindra Behera, B.B. Pati, B.P. Panigrahi, andS.Misra (2012) “An application of Genetic Programming for Power System Planning and Operation”, ACEEE Int. Jour on Control System and instrumentation, Vol.3, Issue.2 pp.15-20, 2012.
  • Mamun Mishra, B.K. Panigrahi, & B.B. Pati, (2012) “Improvement in Voltage Stability by Optimal Placement of Distributed Generation”, Electrical India, November 2012, pp.40-48.
  • Monalisha.Biswal, B.B. Pati, and A.K. Pradhan (2012) “Directional relaying of series compensated line using integrated approach”, Electric Power Components and Systems, Vol.40, , pp.691-710, 2012.
  • Rabindra Behera, B.B.Pati, B.P. Panigrahi, and D.K. Rout,(2011) “Reliability Evaluation of a Power System including wind Mill”, ELECTRICA INDIA, Vol. 51 (04) April 2011 page 40-48
  • Shibashis Sahu, & B.B. Pati,(2011) “Reliability Enhancement in Electrical Energy Management System”, Electrical India, Vol.51, No.10, October-2011 pp.96-103.
  • ShibashisSahu, B.B. Pati and Deba Prasad Patra,(2011) “Fault Classification and location algorithm for series compensated power transmission line”, Int. Jour. Of Electrical Energy systems, Vo.3, No.2, July-Dec.2011, ISSN0975-7147, pp.65-70.
  • B.B. Pati, and Maheswar Behera,(2011) “Detection of faults in Distribution Transformer and Classification using Wavelet Transform” Indian Journal of Power and River Valley Development, Vol.61, No.7 & 8 July-Aug.2011.
  • Rabindra Behera, B.B.Pati, B.P.Panigrahi,(2011) , “Economic Power Dispatch Problem using Artificial Immune System, International Journal of Scientific & Engineering Research Volume 2, Issue 5, May-2011 ISSN 2229-5518, pp125-130.
  • Rabindra Behera, B.P. Panigrahi, & B.B. Pati,(2011) “A Hybrid Short Term Load Forecasting Model of an Indian Grid”, Energy & Power Engineering, Scientific Research May 2011, 3, pp.190-193.
  • B.B.Pati, K.C.Patra,(2004) “Dither in Two-dimensional System with memoryless nonlinearity and system stability”, Journal of Institution of Engrs. (Ind), Vol.84, March 2004.
  • B.B.Pati and K.C.Patra,(2002)“Assessing online dispatch approach for energy loss minimisation in power system”,Electrical review April-02.
  • B.B.Pati, K.C.Patra,(2000) "Modelling & Prediction of Forced Oscillations in Two Dimensional Nonlinear System Using Levenberg-Marquardt Approximation Based Neural Network", Jour of Inst. of Engrs (India), Vol.81, June 2000, pp.30-33.
  • B.B.Pati, K.C.Patra,(2000) “Normalised Phasor Diagram Method of Prediction of Limit Cycle for Two dimensional Nonlinear System”, Journal of Institution of Engrs. (Ind), December-2000.
  • A.K.Panda, K.C.Patra, and B.B.Pati, (2000)"Studies on Switching Boost Converter", Journal of Institution of Engineers (India), Vol.81, Sept.2000, pp.86-90.
  • K.C.Patra, B.B.Pati, A.Lozowicki,(1999) "Structural formulation and self-oscillation prediction in multidimensional nonlinear closed loop autonomous system", Int. Journal of Applied Mathematics and Computer Science, Poland, vol. 9, No.2, 1999, pp. 327- 346.
  • B.B.Pati, and K.C.Patra,(1999)"Energy Conservation By Improved Product And Process Design", Electrical Review, pp. 8-9, January, 1999.
  • B.B.Pati, and K.C.Patra,(1999)"Monitoring Transformer Oil Quality", Electrical Review, pp. 2-4, Nov. 1999.
  • K.C.Patra, B.B.Pati,(1998)"An investigation of forced oscillation for stabilisation of two dimensional nonlinear system", Journal of Systems and Control Letters, Vol.35, 1998, pp.229-236.
  • B.B.Pati, K.C.Patra,(1998) "Energy Conservation: Its Planning and Management", Journal of Kurukshetra (I), July 1998,pp. 9-12.
  • B.B.Pati, and K.C.Patra,(1998) "Matlab/Simulink Prediction of transient behavior of variable pressure operating system of steam power plant", Journal of Power and River Valley Development, Vol.XLVIII, No.9 & 10 Sept.1998, pp.133-135.
  • K.C.Patra, B.B.Pati, and J.Kackprzyk,(1997) "Signal stabilisation of Two dimensional nonlinear relay control systems", Journal of Archives of Control Sc. (Poland), Vol.6(XLII),1997, pp.89-101.
  • K.C.Patra, and B.B.Pati,(1997) "On Asynchronous Excitation of Two dimensional nonlinear self-oscillating System", Journal of Inst. of Engrs. (Ind), Vol.78, Aug.1997, pp.79-82.
  • B.B.Pati, N.K.Sahu and K.C.Patra,(1996) "Life Estimation of Transformer Oil under Thermal Stress," Indian Journal of Power and River Valley Development (I), July-August'96, pp.92-95.
  • K.C.Patra, B.B.Pati and J.Kacprzyk,(1995) "Prediction of Limit Cycle in Non-Linear Multivariable Systems," Archives of Control Sciences, Poland,Vol.4(XL),1995, No.3 & 4, pp.281-297.
  • B.B.Pati, K.C.Patra, and M.S.Naidu,(1995) "Influence of SF6 Insulatio n on Design and Performance of Gas Insulated System/Equipment (GIS/GIE)", IEEMA Journal,India,Vol.XV,No.7,July-95,pp.6-10.
  • B.B.Pati, K.C.Patra, (1995)"Least Cost Utility Planning" Energy Conservation Bulletin, A monthly Journal of Energy Conservation Society India, Vol.3, No.12, Dec-1995, pp.1-2.
  • B.B.Pati, K.C.Patra and M.S.Naidu, (1994)"Variation of Surface Flashover Voltage in SF6 with Pressures" IEEE Trans. on Dielectrics and Electrical Insulation, Vol.1, No.6, Dec.-1994, pp.1175-1179.
  • B.B.Pati, B.P.Panigrahi, and K.C.Patra,(1994) "Effects of SF6 Release and its By-products on Environment, Personnel Safety, and Equipment Integrity" Jour.of Industrial Pollution Control, India, 10(2), 1994, pp.103-111.
  • K.C.Patra, K.S.Nanda, and B.B.Pati, (1993)"Energy Conservation by Modified Design of Motor Terminal Box and Dc Motor Field winding Protection-Case Studies", Electrical India, Vol.XXXIII, No.17, Sep.1993, pp.3-8.
  • B.B.Pati, K.C.Patra, and M.S.Naidu (1993)"Variation of Spacer Efficiency with Gas Pressure for Rod-plane Spacer geometry in SF6 medium under long fronted switching impulse voltages", Electrical India,Vol.XXXIII, No.22, Nov.1993, pp.13-17.
  • Manoj Kumar Dash, Santosh Kumar Senapati and Aurovinda Mohanty,"Natural Convection Around Three Horizontal Cylinders in Vertical Array: A Numerical Approach", Journal of Thermophysics and Heat Transfer,https://doi.org/10.2514/1.T6925
  • Mohanty, Aurovinda, Santosh Kumar Senapati, Viplove Ranjan Ganguly, and Manoj Kumar Dash. “Computation of Natural Convection Heat Transfer from an Infrared Suppression Device (IRS) with Multiple Louvered Cylindrical Funnels.” Numerical Heat Transfer, Part A: Applications, (2024), 1–17. doi:10.1080/10407782.2024.2328763.
  • Rahul Ray, Aurovinda Mohanty*, Pandab Patro, Santosh Kumar Senapati"Performance improvement of a heat sink with triangular slotted and interrupted fins: A computational study",Applied Thermal Engineering,Volume 230, Part B, 2023,DOI:https://doi.org/10.1016/j.applthermaleng.2023.120783
  • Aurovinda Mohanty, Santosh Kumar Senapati and Manoj Kumar Dash, “Cooling Characteristic of an Infrared Suppression Device with Single Perforated Funnel: A Computational Fluid Dynamics Approach”, Journal of Thermal Science and Engineering Applications; 2023, Volume 15, issue1, Pages: 1-10.DOI: https://doi.org/10.1115/1.4055263.
  • Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, “Entropy Generation Study of Turbine Exhaust Gas Through an Infrared Suppression Device”, Journal of Thermophysics and Heat Transfer, 2021, Pages: 1-12. https://doi.org/10.2514/1.T6411
  • Rahul Ray, Aurovinda Mohanty*, Pandab Patro and Kartik Tripathy, “Performance enhancement of heat sink with branched and interrupted fins”, International Communications in Heat and Mass Transfer, Volume 133,2022, Pages: 1-11. https://doi.org/10.1016/j.icheatmasstransfer.2022.105945
  • Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, “Conjugate free convection with surface radiation from real-scale IRS system with multiple conical funnels: A numerical analysis”, International Communications in Heat and Mass Transfer, Volume 134, 2022. https://doi.org/10.1016/j.icheatmasstransfer.2022.106004
  • Vikrant Chandrakar, Jnana Ranjan Senapati & Aurovinda Mohanty, “Conjugate heat transfer due to conduction, natural convection, and radiation from a vertical hollow cylinder with finite thickness, Numerical Heat Transfer, Part A: Applications, 2020,Pages: 1-25. https://doi.org/10.1080/10407782.2020.1847524
  • Ashok K. Barik, Arouvinda Mohanty, Jnana R. Senapati, Mohamed M. Awad, “Constructural design of different ribs for thermos-fluid performance enhancement of a solar air heater (SAH)”, International Journal of Thermal Science, Volume 160, 2020, Pages: 1-14. https://doi.org/10.2514/1.T6411
  • Ajay Gupta, Gautam, Satyabrata Sahoo, Aurovinda Mohanty, “ Perforamance evaluation of porous fin with prescribed tip temperature: An analytical and numerical approach”, International Journal of Heat and Mass Transfer, Volume 156, 2020 Pages: 1-16. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119736
  • Aurovinda mohanty, Santosh Kumar Senapti and Sukanta K. Dash, “Natural convection cooling of an Infrared suppression device (IRS) with conical funnels- a computational approach”, International Communications in Heat and Mass Transfer, Volume 118, 2020, Pages: 1-13. https://doi.org/10.1016/j.icheatmasstransfer.2020.104891
  • Ghoshdastidar P S, Kabelac S and Mohanty A, Numerical modeling of atmospheric pool boiling by the coupled map lattice method, Journal of Mechanical Engineering Science, Part C, Feb 2004, Pages195-05,doi:https://doi.org/10.1243/095440604322886946
  • Mohanty A, Dash S K, Roy S, Natural convection cooling of an infrared suppression (IRS) device with cylindrical funnels, International journal of thermal sciences, Volume 141, July 2019, Pages 103-113,doi:https://doi.org/10.1016/j.ijthermalsci.2019.03.032
  • A. Jena, S. K. Pattnaik, S. K. Sarangi, The performance of advanced cutting tools used for dry machining of aluminium, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2.2 SCIE, 46 (2024) 441, 10.1007/s40430-024-05025-3
  • A. Jena, B. B. Palei S. K. Pattnaik, S. K. Sarangi, AFM, Nano-indentation and TEM characterization study of HFCVD diamond on Tantalum and Diamond seeded cemented carbide inserts, Int. J. Refractory Metals and Hard Materials, Elsevier Science, 3.6 SCI 118 (2024) 106503, 10.1016/j.ijrmhm.2023.106503
  • A. Jena, S. K. Pattnaik, B. B. Palei, S. K. Sarangi Synthesis of diamond crystal growth on tungsten carbide inserts by HFCVD using various seeding powders Applied Physics A, Springer 2.584 SCI 128 (2022) 287 10.1007/s00339-022-05417-z
  • L. R. Bhandarkar, P. P. Mohanty, S. K. Sarangi Experimental study and multi-objective optimization of process parameters during turning of 100Cr6 using C-type advanced coated tools Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1.762 SCOPUS 235 (2021) 7634-7654 10.1177/09544062211043144 journals.sagepub.com/home/pic
  • L. R. Bhandarkar, M. Behera, P. P. Mohanty, S. K. Sarangi Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools Measurement, Elsevier Science 3.464 SCOPUS 172 (2021) 108842 February 2021 https://doi.org/10.1016/j.measurement.2020.108842
  • S. K. Pattnaik, M. Behera, S. Padhi, P. R. Dash, S. K. Sarangi Study of cutting force and tool wear during turning of aluminium with WC, PCD and HFCVD coated MCD tool Manufacturing Review, EDP Sciences 1.44 SCOPUS 7 (2020) 27 August 2020 https://doi.org/10.1051/mfreview/2020026
  • M. Behera, A. Jena, S. K. Pattnaik, S. Padhi, S. K. Sarangi The effect of transition-metal seeding powder on deposition and growth of diamond synthesized by hot filament chemical vapor deposition processes on cemented carbide substrates and its characterization Materials Chemistry and Physics, Elsevier Science 3.47 SCOPUS 256 (2020) 123638 August 2020 10.1016/j.matchemphys.2020.123638
  • D. K. Sahu, S. K. Sarangi, K. U. Sri Influence of substrate bias on performance of diamond coating on WC cutting inserts for machining of aluminium by HFCVD process International Journal of Materials Engineering Innovation, Inderscience SCOPUS 11 Issue 4 (2020) 293-308 https://dx.doi.org/10.1504/IJMATEI.2020.112096
  • S. Padhi, M. Behera, S. K. Pattnaik, S. K. Sarangi Diamond Thin Film Coating on WC Substrate by HFCVD Method using Different Seeding Powders and Its Characterization International Journal of Recent Technology and Engineering SCOPUS 8 Issue-2 (2019) 5175-5180 10.35940/ijrte.B3169.078219
  • R. Kumar, S. K. Pattnaik, J. K. Minz, S. Padhi, S. K. Sarangi Influence of cutting parameters on cutting forces and surface roughness in dry turning of Al. using PCD and different coated tools Sadhana, Academic of Sciences, Springer 0.592 44 (2019) 186 10.1007/s12046-019-1155-4Sadhana(0123456789().,-volV)F]T(30123456789().,-volV)
  • S. K. Pattanik, N. K. Bhoi, S. Padhi, S. K. Sarangi Dry machining of aluminium for proper selection of cutting tool: tool performance and tool wear The International Journal of Advanced Manufacturing Technology, Springer 1.568 98 (2018) 55 10.1007/s00170-017-0307-0
  • P. R. Dash, K. Ray, S. K. Sarangi, P. K. Pradhan Analysis of Static Instability of an Asymmetric, Rotating Sandwich-Beam Advances in Acoustics and Vibration Open Access 2012 (2012) 191042 10.1155/2012/191042
  • S. K. Sarangi, A. Chattopadhyay, A.K. Chattopadhyay Influence of process parameters on crystal growth of diamond on cemented carbide substrates by HFCVD system Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 31 (2012) 1 10.1016/j.ijrmhm.2011.07.007
  • A. K. Chattopadhyay, P. Roy, S. K. Sarangi Study of wettability test of pure aluminum against uncoated and coated carbide inserts Surface and Coatings Technology, Elsevier Science 2.135 204 (2009) 410 10.1016/j.surfcoat.2009.07.038
  • P. Roy, S. K. Sarangi, A. Ghosh, A.K. Chattopadhyay Machinability study of pure aluminium and Al-12% Silicon alloys against uncoated and coated carbide inserts Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 27 (2009) 535 10.1016/j.ijrmhm.2008.04.008
  • A. K. Chattopadhyay, P. Roy, A. Ghosh, S. K. Sarangi Wettability and machinability study of pure aluminum towards uncoated and coated carbide cutting tool inserts Surface and Coatings Technology, Elsevier Science 2.135 203 (2009) 94110.1016/j.surfcoat.2008.08.047
  • A. Chattopadhyay, S. K. Sarangi, A. K. Chattopadhyay Effect of negative dc substrate bias on morphology and adhesion of diamond coating synthesised on carbide turning tools by modified HFCVD method Applied Surface Science, Elsevier Science 2.711 255 (2008) 1661 10.1016/j.apsusc.2008.04.065
  • S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment, seeding and interlayer on nucleation and growth of HFCVD diamond films on cemented carbide tools Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 26 (2008) 220 10.1016/j.ijrmhm.2007.05.002
  • S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment methods and chamber pressure on morphology, quality and adhesion of HFCVD diamond coating on cemented carbide inserts Applied Surface Science, Elsevier Science 2.711 254 (2008) 3721 10.1016/j.apsusc.2007.10.104
  • Rana J., Mishra P.K and Prasad B.V.S.S.S., "A Transient Three Dimensional Thermal Model for Laser Heat Treatment of Finite Size Work pieces’’ Journal of Materials Processing and Manufacturing Science, Vol-5, April, 1997, pp 283-293.
  • Rana J., Prasad B.V.S.S.S and Mishra P.K., "Case Hardening of Laser Treated Steel Specimen Using Energy Integral Method". Journal of Materials Processing and Manufacturing Science, Vol-6, Jan, 1998, pp229-238.
  • Rana J., Goswami G.L., Jha S.K., Mishra P.K. and Prasad B. V.S.S.S. "Experimental studies on the microstructure and hardness of laser-treated steel specimens". Journal of Optics and Laser Technology, Vol- 39, 2007, pp 385-393.
  • Rana J., Suar S. and Bhoi R.K., "Optimization of Process Parameters in Laser Drilling Using Taguchi Technique", International Journal of Manufacturing Technology and Research, Vol-4, No. 1-2, Jan- June 2008, pp. 77-78.
  • Rana J., Prasad B.V.S.S.S. and Mishra P.K., "Optimization of Process parameters for CO2 Laser transformation hardening", Published in International Journal of Manufacturing Technology and Research, Vol. 4, No. 3-4, July- Dec, 2008, pp. 75-81.
  • Rana J. and Pradhan P., "Optimization of Process Parameters for Ductile and Brittle materials in Surface Grinding", Published in the International Journal for Manufacturing Technology and Research, Vol. 5, No. 1-2, Jan-July, 2009, pp. 74-80.
  • Pradhan P., Rana J and Mishra C., "Effect of hardening on fatigue life of C-40 steel’’ Strength, Fracture and Complexity, Vol. 7, 2011, pp. 273-283.
  • Satapathy B.B., Rana J. and Maity K.P., "Effect of Process Parameters in Laser Drilling", International Journal of Applied Engineering Research, Vol-6, No.18,2011, pp. 2258-2262.
  • Satapathy B.B., Rana J, Maity K.P. and Biswal S., "Optimization of Process Parameter in Laser Percussion Drilling". International Journal of Creative Mathematical Science and Technology. Vol. 17, No.25, 2012, pp. 17-25.
  • Satapathy B.B., Rana J. and Maity K.P., "Quality Optimization of microhole in Laser Drilling" IOSR Journal of Engineering, Mar-2012, Vo. 2(3), pp. 382-388.
  • Satapathy B.B., Rana J., Maity K.P. and Biswal S. "Experimental Study in the process parameters in Laser Percussion Drilling". International Journal of Scientific and Engineering Research Vol. 4, Issue-5, May-2013, pp. 36-39.
  • Mohanty U.K. and Rana J., "Parametric Optimization of EDM process using Weighted signal to noise Ratio". International Journal of Material Sciences and Manufacturing Engineering, April 2015 Vol. 42, Issue- I, pp. 1187-1193.
  • I Nayak and J Rana., "Selection of a Suitable Multi-response Optimization Technique for Turning Operation", Decision Science Letter-5, July 2015,pp 129-142.
  • B.B. Satapathy ,J.Rana and K.P.Maity,"Numerical prediction of hole profile in laser drilling process and experimental validation",International Journal of Advanced Manufacturing Technology,Published online on 28th Oct.-2016.
  • I Nayak, J Rana and A.Parida., "Performance Optimization in Electro Discharge Machining using a suitable multi-response optimization techinque", Published online on 9th Dec.-2016 in Decision Science Letter (Volume-6-2017,pp 283-294).
  • Bioremediation - An Overview (NATIONAL CONFERENCE), RAFPCE-2015, Centurian University, Odisha.
  • Stabilization of Fly ash using Biopolymer (INTERNATIONAL CONFERENCE), GCPF-2015, Procedia Earth and Planetory Science Elsevier, NIT, Surathkal, India.
  • Stabilization of Dispersive soil using Biopolymer (INTERNATIONAL CONFERENCE), GeoMEast 2017, Sharm El-Sheik, Egypt.
  • "Unveiling girls’ education odyssey: A machine learning approach to analyzing socio-economic factors influencing elementary and secondary education progress in Bolangir district of Odisha" jointly with Dr. Subhashree Mohapatra and Dr. Bighnaraj Naik (Project Completed)
  • "Modelling of Urban flooding in Sambalpur town & its mitigation measures". A multidisciplinary project funded by the World Bank jointly with Prof A. K. Kar & Prof P. C. Swain (Project Ongoing)
  • "Regional and subregional analyses of macroeconomic policy strategies for growth and equality in Southern Africa", project funded by the UNU-WIDER:Helsinki jointly with Prof. Dukhabandhu Sahoo, Dr. Diptimayee Mishra, Ms. Phendulwa Zikhona Makunga and Ms. Jayanti Behera (Project completed)
  • Worked as a Research Associate in an Indian Council of Social Science Research (ICSSR) sponsored research project on “Impact of Joint Forest Management(JFM)on Livelihood and Stress Migration in Odisha: A Case Study”in association with Dr.Naresh Chandra Sahu, Indian Institute of Technology, Bhubaneswar, Odisha, India.
  • Name of the research project : Numerical and Experimental Investigation on Nonlinear Vibroacoustic Response of Laminated Composite and Functionally Graded Material Shell Panel under Hygrothermal EnvironmentAmount(Rupees in Lakhs) : 32.67Date of Sanction : 18/12/2019Sponsoring agency : SERB, DST, Govt. of IndiaStatus : Completed (Production Engineering)
  • Name of the research project : DST-NIMAT Project 2018-19Amount(Rupees in Lakhs) : 0.8Date of Sanction : 04/072018Sponsoring agency : EDII, DST, Govt. of IndiaStatus : Completed (Production Engineering)
  • Name of the research project : Optimal design of Ceramic and Nanoparticle filled composite structure using hybrid (FEM and soft computing) techniqueAmount(Rupees in Lakhs) : 0.55Date of Sanction : 16/01/2020Sponsoring agency : TEQIP-III, VSSUT, Burla“Collaborative Research and Innovation scheme” Status : Completed (Production Engineering)
  • Name of the research project : Development, Characterization andMechanical Response Analysis of Nano Fibrillated Cellulose (NFC) Filled Hybrid Nano-composites Amount(Rupees in Lakhs) : 0.50Date of Sanction : 18/03/2021Sponsoring agency : TEQIP-III, VSSUT, Burla“Collaborative Research and Innovation scheme” Status : Completed (Production Engineering)
  • Title of Project: Sustainability assessment and comparative investigation towards machinability improvement of AISI D3 steel using new-generation ultrahard coated carbide tool under different cooling-lubrication conditions Funding agency: Collaborative Research and Innovation Scheme of TEQIP-III Ref. no.: VSSUT/TEQIP/119/2020 Grant-in-aid Sanctioned: Rs. 50000/- Year: 2019-2020
  • AICTE sponsored research project (Rs. 17.8 lakhs) 20/AICTE/RIFD/RPS43/2012-1
  • KIIT University seed grant for Green Engine Development (Rs. 10 Lakhs)
  • Real-time Contamination (Metallic and Non-metallic) Detection in Water Body and Wetland of Hirakud Dam” by PI(s) Dr. Arunanshu Mahapatro, and Dr. Pankaj Charan Jena, VSSUT, Burla. Funding Amount Rs. 20, 000, 00.00 from TIH-IIT Guwahati, Duration 2025-2027
  • OURIIP -2022 Grant, Department of Higher Education, Govt. of Odisha, Rs.6,78,000. Duration 2023-2025
  • Research Grant under “Collaborative Research and Innovation Scheme” of TEQIP-III (VSSUT, Burla) with Project Title: Development of light weight fiber reinforced polymer composite for a low cost mobile shelter house order No. VSSUT/TEQIP/162/2021, dated 18-03-2021 with a Grant Sanctioned: INR 50,000/-.
  • Third Party Quality Assessment (TPQA) of the Electrical Works of construction of Critical Care Units Building (S+5) of AIIMS Sijua, Bhubaneswar, Amount: &#x20B9; 9.63 Lakhs, Dealing Agency: Central Public Works Department (CPWD), Bhubaneswar, Duration: 2 years from Sep. 2024 – Continue, Role: Inspection Officer/ Consultant (Ongoing). Project code: W.O. No. 54(110)/ AIIMSSPD/ CPWD/ BBSR/ 2024-25/-93, Project Cost: &#x20B9; 40.00 Cr
  • Third Party Quality Assessment (TPQA) of the Electrical Works of construction of New Administrative Building (S+8) of AIIMS Sijua, Bhubaneswar, Amount: &#x20B9; 6.96 Lakhs, Dealing Agency: Central Public Works Department (CPWD), Bhubaneswar, Duration: 2 years from May 2022 – Continue, Role: Inspection Officer/ Consultant (Ongoing). Project code: W.O. No. 09/EE & SM(C)-I/AIIMSPD/CPWD/BBSR, Project Cost: &#x20B9; 29.00 Cr
  • Smart Sensors Enabled Optical Wireless Data Acquisition for Smart-Grid Application, Amount: &#x20B9; 9.89-lakhs, Funding agency: Science & Technology Department (S&TD), Bhubaneswar, Govt. of Odisha, Duration: 2 years from Sep. 2022 – Mar. 2025, Role: Principal Investigator (PI) (Completed). Project code: 2149/ST, Bhubaneswar, ST-SCST-MISC-0045-2021
  • Transformer Oil Testing in MCL facilities, Amount: &#x20B9; 1.19 Lakhs, Dealing Agency: Mahanadi Coalfields Limited (MCL), Burla, Duration: 1 year from Jun. 2022 – Mar. 2023, Role: Principal Investigator/ Consultant. Project code: Ref. Nos. MCL/SAMB/Civil-welfare/TA/22-23/183 and MCL/SBP/E&M/2022-23/20861850 Complaint SF6 Monitoring System for Gas Insulated Switchgear
  • IEC 61850 Complaint SF6 Monitoring System for Gas Insulated Switchgear, Amount: &#x20B9; 48-lakhs, Funding agency: Central Power Research Institute (CPRI), Bengaluru under Ministry of Power (MOP), Govt. of India, Duration: 2 years from Sep. 2018 – Mar. 2021, Role: Principal Investigator (PI), Co-PI – Prof. T. Islam, JMI, New Delhi (Completed). Project code: RSOP/2017/TR/2/1962017
  • Internet of Things Driven Speed Control of Electrical Equipment(s): A Smart Home, Amount: &#x20B9; 50-thousand, Funding agency: NPIU-MHRD, TEQIP-III under Collaborative Research and Innovation (CRI) Scheme for Duration: 1 year from Jan. 2020 – Dec. 2020, Role: Principal Investigator (PI), (Completed). Vide. No. VSSUT/TEQIP/37/2020, dt. 16/01/2020
  • IoT based Environment Sensor Tracking WSN for Hydro Power Generation Applications, Amount: &#x20B9; 01-lakh, Funding agency: Advance Tech. Pvt. Ltd., Zirakpur (India), Duration: 4 months from Mar. 2016 to Jun. 2016, Role: PI (sole) (Completed).
  • Process Instrumentation of the State-of-the-art Integrated Cooling System for large generators in Power Plants, Amount: &#x20B9; 4.85 lakhs, Funding agency: Seed Money Grant, Thapar University, Patiala, Duration: 2 years from Jul. 2014 to Jun. 2016, Role: PI (sole) (Completed).
  • Completed a project sanctioned research grant under Collaborative Research and Innovation Scheme of TEQIP-III, VSSUT-burla, of Rs.70, 000/ in 2020.
  • Design of housing options for the EWS, low and middle income group, for different agro-climatic zones in the state of Odisha -  BMPTC, Govt. of India, New Delhi and SPA, Vijayawada
  • Design and Innovation Centre - IIT, Bombay and SPA, Vijayawada
  • DST-EMEQ Project Grant (Rs:- 19 lakhs) DST, Govt. of India
  • DST-Biotechnology Project Grant (Rs:- 10 lakhs) DST, Govt. of Odihsa
  • DST-EMEQ Project Grant (Rs:- 39.21 lakhs) DST, Govt. of India
  • UGC-START-UP Research Grant (Rs:-10 lakhs) UGC Govt. of India
  • Offer of Research Grant under “Collaborative Research and Innovation scheme” 2020-2021 Agency TEQIP-III, VSSUT Burla
  • Sustainability assessment and comparative investigation towards machinability improvement of AISI D3 steel using new-generation ultrahard coated carbide tool under different cooling-lubrication,TEQIP-III
  • Title of Project: Laser Machining of CNT based composite material<br> Funding agency: Collaborative Research and Innovation Scheme of TEQIP-III<br> Ref no: VSSUT/574<br> Grant-in-aid Sanctioned: Rs. 50000/-<br> Year: 2019-2020
  • Development of a new class of polymer composites using natural fiber and bio-wastes, AICTE, New Delhi, 20/AICTE/RIFD/RPS (POLICY-III) 42/2012-13.
  • Study of distortion and residual stresses in fusion welded structure and development of their minimization techniques, AICTE, New Delhi, 8023/BOR/RID/RPS-141/2008-09
  • Development, Characterization and Mechanical Response Analysis of Nano Fibrillated Cellulose (NFC) Filled Hybrid Nano-composites, VSSUT/TEQIP/158/2021.
  • Real-time Contamination (Metallic and Non-metallic) Detection in Water Body and Wetland of Hirakud Dam” by PI(s) Dr. Arunanshu Mahapatro, and Dr. Pankaj Charan Jena, VSSUT, Burla. Funding Amount Rs. 20, 000, 00.00 from TIH-IIT Guwahati, Duration 2025-2027
  • Collaborative Research and Innovation Scheme of TEQIP-III. Jan 2020-Dec 2020, Rs. 0.6 lakhs.
  • Enhancement in bone regeneration by hydroxyapatite – doped piezoelectric composite coating.2021, 2years project, OURIIP, 4.25 lakhs.
  • Molecular Modelling on Metallic Nanoclusters for Advanced Technological Applications: Odisha State Higher Education Council (OURIIP-2022)
  • Modernization of Structural Engineering Lab, AICTE, 2017-2020
  • Development of Cement-Less Concrete Utilizing Industrial Solid Waste as Precursor and Rice Husk Ash as Source for Production of Alkali Activators, Science and Technology Department, Govt. of Odisha, 2020-2022
  • Sustainable construction practice through preparation of precast concrete blocks using construction-demolition and plastic waste, International Cooperation (Bilateral), India-Sri Lanka joint research programme, Ministry of Science and Technology, Government of India, 2021-Continuing
  • <strong>Key Consultancy Services:</strong><br><br>Consultancy Services for engagement of Authority Engineer for construction supervision of the work widening and strengthening of SH 22 and SH 36 at KIIT University
  • Design of the structural elements for construction of mini stadium at Baliguda, Integrated Tribal Development Agency (ITDA), Baliguda, Odisha at KIIT University
  • Structural design of abutment for construction of the Bailey bridge under ITDA, Integrated Tribal Development Agency (ITDA), Baliguda at KIIT University
  • Checking of design and drawing of Town Hall-cum- Auditorium, Binka N.A.C., The Executive Officer Notified Area Council (N.A.C), Binka, Odisha at VSSUT Burla
  • Vetting of design & structural drawing of AGE E&M & AGE B&R, subdivision office & accommodation for security control systems at DMRL at VSSUT Burla
  • Grinding aid and performance improver for the cement industries UNISOL INC. Gurgaon, India at KIIT University
  • Non-destructive Test for concrete of Silo foundation at GTC-I of Aditya Aluminium, Lapanga, Aditya Aluminium, Lapanga, Odisha at VSSUT Burla
  • Vetting of Hydraulic design, structural design and estimates of overhead tanks, and water treatment plant for integrated rural piped water supply schemes of Sambalpur division RWSS division, Sambalpur at VSSUT Burla
  • Third party quality assurance check for Hindustan Steel Works Construction Limited, at VSSUT Burla.
  • Vetting of design & structural drawing of residential buildings, Odisha State Housing Board at VSSUT Burla.
  • Vetting of structural drawings for construction of 12 nos. Of ‘D’ type Quarters at CHEP, Chipilima, Odisha Hydro Power Corporation Ltd at VSSUT Burla.
  • TPQA for construction of central Government holiday home (G+3) and VVIP suite (G+1) at Rairangpur, Mayurbhanj, Odisha
  • Vetting of 1.25 lakh RCC overhead tankwith 20 m height staging for EMRS, Bangirposhi,
  • Vetting of 1.25 lakh RCC overhead tankwith 20 m height staging for EMRS, Tato, Karanjia
  • TPQA for construction of 150 beded critical care (S+5) building at AIIMS campus Bhubaneswar
  • Design of market complex at NAC Padmapur
  • Design of town hall at NAC Padmapur
  • Consultancy: Construction of sports and common facilities complex and 1000 seated open air theater at NIT Rourkela TPQA of balance work of 15 Crore, CPWD Rourkela
  • Consultancy: Design of 3R Type faculty quarter S+6 at VSSUT Burla, CPWD Sambalpur
  • Consultancy: Vetting of Construction of 130 MLDwater treatment plant and its ancillary structures for improvement of water supply to Bhubaneswar city, L C infra–Projects Pvt Ltd Bhubaneswar
  • Consultancy: Design of toilet Block and box culvert at AIIMS Balesore, CPWD AIIMS project Division
  • Consultancy: Vetting of construction KV Digpahandi Staff quarter, Office building and other structures, CPWD Bhubaneswar
  • Consultancy: Design of ESR at Sundergarh, Rajkamal Ashoka JV
  • Consultancy: Design of 10 nos of ESR at Keonjhar, Sri Mohangarh Construction Company
  • Consultancy: Vetting of Type II quarters for RIE BBSR, CPWD BBSR
  • Consultancy:Vetting of construction of language laboratory inside DM school in RIE Campus BBSR, CPWD BBSR
  • Consultancy: Vetting of structural drawings for construction of office building Annex Block for GSI at BBSR, CPWD BBSR
  • Consultancy: Structural design of Farmers Hostel at KVK Santhpur under NRRI, Cuttack, Odisha, CPWD BBBSR
  • Consultancy: Vetting of Structural design for the work Detailed analysis and design of proposed RCC bridge over Shyamakori Crrek near gypsum pond of PPL, Paradeep, Odisha, Aankhe Engineers LLP, Cuttack
  • Consultancy: Structural design of acoustic canopy size 21.5 m x 22 m for CISF, KRTC, Mundali Cuttack, CPWD
  • Consultancy: Checking of ESR under Pipili Block, RWSS Puri
  • Consultancy: Design and drawings for ESR at Karanjia, SCL Infratech Limited
  • Consultancy: Proof checking of Structural design for the work construction of Lab cum office building at Bhubaneswar,CPWD, Bhubaneswar
  • Consultancy: Design of Academic, Administrative block and Guest House of NIT Rourkela at Bhubaneswar, CPWD, Bhubaneswar
  • Consultancy: Quality Monitoring of PMGSY roads in Odisha, Engineer in Chief, Rural Works, Government of Odisha
  • Consultancy: Vetting of structural drawings of 2nd phase office building (Academic Block) of GSI at Bhubaneswar i/c internal water supply, sanitary installation, electrical installation and Lift ,CPWD, Bhubaneswar
  • Consultancy: Structural design and drawings of 1000 seated capacity convention hall for Fakir Mohan University, Balesore, CPWD, Bhubaneswar
  • Consultancy:Third party Quality Assurance for construction of new administrative building (S+8) including internal water supply, sanitary installation, drainage and providing E & M service at AIIMS Sijua, Bhubaneswar, Odisha, CPWD, Bhubaneswar
  • Consultancy:Vetting of structural design drawings for the work “Detailed design of proposed construction of service building in connection with the work upgradation of rolling pit line coaching Depot, Bhubaneswar station”, Aankhe Engineers LLP, Cuttack
  • Consultancy: Vetting of structural design drawings for the work “Checking of existing FOB (middle) and carrying out detailed structural analysis as per current code of practice to check the stability of the structure necessary modification for strengthening vertical members, without violating code of practice and provide detailed structural drawing of all joints, Aankhe Engineers LLP, Cuttack
  • Consultancy:Proof checking of structural plan and design of the work construction of SO’s Mess with 45 Nos suites for 41 Bn. ITBP, Tartua, Khurda, CPWD, Bhubaneswar
  • Consultancy:Construction of permanent building for Police outpost, Security office and Hospital/Sanitary services at AIIMS, Sijua, Bhubaneswar, Odisha, Structural analysis design and preparation and submission of duly proof checked structural drawings of Police post (G+2) ,CPWD, Bhubaneswar
  • Consultancy: Vetting of structural plan and design of the work construction of GIRLS HOSTEL (G+3) BUILDING OF IHMCT & AN, BHUBANESWAR, CPWD, Bhubaneswar
  • Consultancy:Structural design of the work construction of Fakir Mohan University, G+4 Academic Block ,CPWD, Bhubaneswar
  • Consultancy:Vetting of structural plan and design of the work construction of residential building at Ranasinghpur, Bhubaneswar, Odisha State Housing Board Bhubaneswar
  • Consultancy: Structural design and drawings for the work (1) Exhibition room, meeting hall, incubation center and Gems processing center (2) Center of excellence for water quality assessment building at CSIR-IMMT, Bhubaneswar, IMMT, Bhubaneswar
  • Consultancy: Third party quality assurance service for the work of construction of school building of Kendriya Vidyalaya No 2 at Burla, Sambalpur,The Braithwaite Burn and Jessop construction company limited (A Govt. of India Undertaking), The Braithwaite Burn and Jessop construction company limited (A Govt. of India Undertaking)
  • Consultancy: Vetting of structural plan and design of the work construction of residential building at Angul town, Odisha State Housing Board Bhubaneswar
  • Consultancy: Vetting of Structural design and drawing of feed store at Naraj, Cuttack, S M Consultant, Bhubaneswar
  • Consultancy: Vetting of overhead water tanks, RWSS Division, Sambalpur, Jharsuguda and Padmapur
  • Consultancy:Vetting of structural plan and design of the work construction of residential building Phase VI and Phase VII at Dumduma, Bhubaneswar, Odisha State Housing Board Bhubaneswar
  • Consultancy: Checking of foundation design for construction of 150 seated ladies hostel for Sambalpur University under CSR of MCL Mahanadi Coalfields Limited
  • Consultancy:Construction of ‘A’ type School Building for Kendriya Vidyalaya No 5, Kalinga Nagar and Kendriya Vidyalaya No 6, Pokhariput, Bhubaneswar-Third party Quality Assurance Hindustan Steel Works Construction Limited Third party quality control
  • Consultancy: Vetting of design of 1,00,000 liters capacity with 15m Staging RCC ESR at village Situpali and Godmunda under Dhankauda Block Executive Engineer, RWS&S Division, Sambalpur
  • Sponsored Projects: Study to assess the performance of bio sand filter(BSF) and available technologies for removal of iron, suspended impurities including pathogens from drinking water in Khordha district of Odisha, DST Project.
  • Consultancy: Proof checking and quality control of buildings for Central Government Employees Welfare and Housing Organisation.
  • Consultancy: Proof checking of Water tanks, RWSS Division, Bhubaneswar.
  • Consultancy: Performance study of Pavements under PMGSY.
  • Consultancy: Proof checking of building, NAC, Boudha.
  • Odisha Govt. Sponsored “Time Motion Study” Project
  • Preparation and Characterization of catalyst for upgrading of pyrolysis oil, Seed grant, TEQIP-II, Vssut, Burla (01 Lakh)
  • Security Analysis of Cloud Infrastructure (0.75 lakhs TEQIP, VSSUT, Burla)
  • <strong>UGC Start-Up-Project:</strong> 2015
  • Completed DST-SERB project title “ Assessment of wide area measurement signal by computational intelligence techniques” under young scientist scheme of 15.46 Lakhs from 2016-2020.
  • Act as a coordinator for organising AICTE Sponsored two week Faculty Development Programme under QIP scheme on “Modeling Analysis and Control of Microgrid” from June 25th – 7th July 2018.<br> (MACMG-2018)<br> Venue: VSSUT, Burla<br> Date: 25th june -7th july 2018<br>
  • Act as a coordinator for organising TEQIP-III Sponsored one week Faculty Development Programme “Modern Electric Power System Networks, MEPSN-2019” from 5th, August – 10th August 2019.<br> (MEPSN-2019)<br> Venue: VSSUT, Burla<br> Date: 5th, August – 10th August 2019
  • PI in the project 'Study of Effect of Variable Channel Conditions on Energy Dissipation through Hydraulic Jump', sponsored by VSSUT- TEQIP, 2020
  • PI in the project 'Velocity profiles of developing and developed open channel flow', sponsored by VSSUT- TEQIP, 2016
  • Computational analysis of the thermal aspects of metal casting process, Seed grant, TEQIP-II, VSSUT, Burla (01 Lakh).
  • Computational Investigation of the thermo-mechanical properties of the Investment Casting Process, UGC, MRP (Applied) (05 Lakhs).
  • Seed Grant project sponsored by TEQIP-II, VSSUT, Burla
  • Seed Grant Project from TEQIP III of ₹ 50,000/- (2021)
  • Seed Grant Project from TEQIP III of ₹ 1,00,000/- (2016)
  • Institute of Engineers - Student Project &ldquo;Modeling &amp; FEM simulation of DRX microstructure for automotive applications&rdquo; (PI: Dr. S.K. BadJena, Co-PI:  A. Lavakumar), Rs.0.5 L (Ongoing).
  • DST-NANO MISSION &ldquo;Enhancing shape memory properties of Ti-Nb binary alloy through ECAE processing for bio-medical applications&rdquo; (<strong>PI</strong>: <strong>Dr. S.K. BadJena,</strong> Co-PI:  A. Lavakumar<strong>Rs.45.0 L</strong>, (Status Awaited).
  • UGC-Minor Project &ldquo;Archeo-metallurgical Investigation on Ancient Sword&rdquo; (PI: A. Lavakumar, Co-PI: <strong>Dr. S.K. BadJena</strong>), <strong>Rs. 5.0 L</strong> (Status Awaited).
  • UGC-Minor Project &ldquo;Modeling, FEM simulation &amp; texture analysis of DRX microstructure for automotive applications&rdquo; (PI: <strong>Dr. S.K. BadJena</strong>, Co-PI:  A. Lavakumar), <strong>Rs.5.0 L</strong>, (Status Awaited).
  • Investigations on Numerical Methods for Studying Bohmian Quantum Trajectories(Ongoing), Project No.: SR/S2/LOP-31/2013
  • Green Synthesis of Novel Liquid Crystals for Display Applications: Potential Method for Industrial Practice (Govt. of Odisha, Department of Science & Technology), Rs. 10Lakhs
  • Principal Investigator of the Start-Up Grant Project Entitled <em><strong>&ldquo;Development of Nanoparticle/Nanotube Hybrid Nanofiller based Thermoplastic Polyurethane/Polyaniline Blend Nanocomposites for Multi-functional Applications&rdquo;</strong></em> funded by Faculty Research Promotion Schemes (FRPS) of the&nbsp;University Grants Commission (UGC), Government of India (GOI)
  • Project Title: Valorisation of Waste Plastics to Aviation fuel using a novel catalyst: Kinetic study, process optimization and Product Characterisation, Duration: Three Years, Total Cost: Rs. 9,86,000/-, Sanctioning Agency: S & T Department, Govt. of Odisha, Order: No.2149/ST, Bhubaneswar, Dated: 06/06/2022
  • Core Research Grant (CRG) from Science and Engineering Research Board (SERB), Government of India for a period of 3 years (2023-2026)
  • FAST track research project in Mathematical Sciences from Science and Engineering Research Board (SERB), Government of India for a period of 3 years (2014-2017) Completed
  • Fekete-Szeogo Problem on Certain Class of Analytic Functions. TEQIP, (2016-17)
  • Project Title: Degree of Approximation by product <img src="http://vssut.ac.in/doc/clip_img5.jpg">- summability of Fourier series of a function belonging to Lipschitz class (Seed grant received in July 2016 from VSSUT, Burla, and completed in 2017)
  • <strong>Title :</strong> Encryption of a Colour Image using chaotic and non-chaotic System ( Intramural Project)<br> <strong>PI :</strong> Dr.Satyabrata Das<br> <strong>Funding Agency :</strong> TEQIP-III<br> <strong>Amount :</strong> 1 lakh<br>
  • <strong>Project Title</strong> - Survivable Information System Architecture with Intrusion tolerance, Containment and Recovery in Distributed Environment (RDE).<br> <strong>Sponsor</strong> - Department of Information Technology (DIT), Ministry of Communications and Information Technology, Government of India.Value - Rs. 5,500,000, Duration - 3.5 Years.<br> <strong>PRINCIPAL INVESTIGATOR (SUPERVISOR)</strong> - Prof. Shamik Sural, Professor, School of Information Technology, IIT Kharagpur, India.<br> <strong>CO-PRINCIPAL INVESTIGATOR</strong> - Prof. A. K. Majumdar, Professor, Department of CSE, IIT Kharagpur, India <br>Undertaken at - School of Information Technology, IIT Kharagpur, India.
  • Seed Grant for the Research project entitled “Monitoring of Resistance Spot Welding Process for Joining Dissimilar Materials”<strong>PI/Co-PI: PI,Duration</strong>: one year (2016-17),<strong>Project Amount</strong>: One Lakh, sponsored by TEQIP, <strong>Status</strong>: Completed
  • Seed Grant for the Research project entitled “Investigation on weld ability of dissimilar alluminium alloy to thermoplastic polymers using friction stir lap joining”<strong>PI/Co-PI: PI,Duration</strong>: one year (2021-22), <strong>Project Amount</strong>: 0.5 Lakh, sponsored by TEQIP-III, <strong>Status</strong>: Ongoing
  • Principal Investigator, of AICTE- MODROB “MODERNIZATION OF COMMUNICATION LABORATORY” Project Amount :-Rs 7.97 lacs
  • AICTE MODROB Project-Modernization of Microcontroller and Embedded System Lab (8.5 Lakh),2017-19
  • TEQIP Project: Fractal Patch Antenna Design for High Frequency Mobile Satellite Communication
  • TEQIP Project: Verification of Antenna designs using Personal Computers
  • Research project sponsored by TEQIP-III, VSSUT, Burla
  • Seed Grant project sponsored by TEQIP-II, VSSUT, Burla
  • Projects Applied to SERB, AICTE INDIA
  • Name of the Project : Development of Fluidized Bed hot Abrasive Jet Machining (FB-HAJM) For Micro Machining Sponsoring Agency : AICTE Ref. No: File No. 8-32/RIFD/RPS-NDF/Policy-1/ 2018-2019 Amount sanctioned : 24,80,000/-
  • Name of the Project : Laser Micromachining of Advance Engineering Materials Sponsoring Agency : AICTE 8023/RID/RPS-49(POLICY-I)(Govt)/2011-2012 Amount sanctioned : 20,00,000/-
  • Name of the Project : Analysis of Micro-Electro discharge machining of advance engineering materials Sponsoring Agency : AICTE 12/AICTE/RIFD/MOD(Policy-2)-63/2012-2013 Amount sanctioned : 1500000/-
  • Name of the Project : Co-axial Nozzle design and manufacturing for Laser micromachining System Sponsoring Agency : TEQIP- II, Vssut, Burla Amount sanctioned : 1,47,140.00
  • Name of the Project : Fabrication and Installation of Abrasive Jet Micromachining Sponsoring Agency : TEQIP- II, Vssut, Burla Amount sanctioned : 1,00,000/-
  • Study on Environmental Impact of Fly ash from major Thermal Power Plants in Odisha” Sponsoring Agency: SPCB, Odisha, 2015-16.
  • Fly Ash Generation & Utilization in Coal Based Thermal Power Stations of Odisha (2013-14)” Sponsoring Agency: SPCB, Odisha, 2014-2015.
  • Evaluation of water quality of some of the Uttaranchal koops located in Dehradun, Tehri and Pauri Districts, Sponsoring Agency: Uttaranchal Jal Sansthan, Uttarakhand, 2006-2007 .
  • Sustainable construction practice through preparation of precast concrete blocks using construction-demolition and plastic waste, DST (International Bilateral Div, Indo Sri Lanka Joint Research Program), 2021 to 2025 (Ongoing)
  • Selection of suitable material components and curing condition for the production of self-compacting geopolymer concrete based on short-term and long-term characteristics, The Institution of Engineers (India) (R&D Grant-in-aid Scheme), 2023-2024, Completed
  • Behaviour of Glass Fibre Reinforced Plastic (GFRP) strengthened Shear Deficient Reinforced Geopolymer Self-Compacting Concrete (GSCC) beam using solid waste, TEQIP III, 2020-2021, Completed
  • Research project from ICSSR, Ministry of Education, Govt. of India, Grant Amount - Rs. 5,00,000/- (initial allotment). (Status: Completed)
  • Research project from DRDO, Ministry of Defence, Govt. of India, Grant Amount - Rs. 10,00,000/- (initial allotment). (Status: On-Going)
  • Research project from SERB, Department of Science & Technology (DST), New Delhi Govt. of India, Grant Amount - Rs. 19,06,000/- (initial allotment). (Status: Completed)
  • Ultrasonic Characterization of Nanofluids for various concentration at different temperature, [<strong>INR.6.00 Lakhs</strong> ,UGC,New Delhi Sponsored Project ,[No.F.20-1(28)/2012(BSR) ]
  • Study of Propagation of Ultrasonic waves in Solvent Mixture Used in Preparation of Natural Fiber from Agricultural Wastes [<strong>INR 8.285 Lakhs</strong>, DRDO, New Delhi,ERIP/ER/1203150/M/01/1559]
  • Development of Ultrasonic Absorbent composite material using Date palm Leaf fiber [<strong>INR 7.358 Lakhs</strong> DRDO, New Delhi,No.ERIP/ER/1203119/M/01/1529]
  • Synthesis and measurement of hybrid acoustic shielding material for environmental noise reduction [<strong>INR9.79 Lakh Planning</strong> and Convergence Department, Govt. of Odisha, Bhubaneswar, No.2751/P, Bhubaneswar PC-INO-ACTI-0010-2018)
  • Designing of hybrid green composites using industrial and bio-waste for acoustical applications.[ <strong>INR 1.00 Lakhs</strong> by TEQIP faculty Research seed money]
  • Development of high temperature piezoelectric ceramics based on (1-x) Bi O3-x PbTiO3 Systems (Ongoing), Project No.: SR/FTP/PS-63/2008
  • Preparation and characterization of graphene nanocomposites by reinforcement of transition metal-based quantum dots CSIR, Govt. of India Ref: 01(2836)/15/EMR-II, Dated 02.06.2015 (2015-2018).
  • Synthesis, characterization and Photochemical studies of Some Novel Polymethine cyanine Dyes Ref: File No. 8023/BOR/RPS-200
  • Synthesis of Polymer/clay Nanocomposites by Emulsifier-free Emulsion Technique: Superabsorbency and Biodegradable Study, <strong>DST-SERC</strong>, <strong>Govt. of India</strong> Ref: SR/FTP/CS-130/2006, (2008-2011).
  • Synthesis and Characterization of Polymer/CNT nanocomposites by Chemically Functionalized Carbon Nanotubes, <strong>DAE-BRNS</strong>, <strong>Govt. of India</strong> Ref: 2008/20/37/BRNS/1936 (2009-2012).
  • Sonochemical investigation of some pharmaceutical active biopolymers and proteins for biomedical application, <strong>DST, Govt. of Odisha</strong>, Ref: ST-Bio-15/2014 (2014-2017).
  • Preparation and characterization of graphene nanocomposites by reinforcement of transition metal based quantum dots <strong>CSIR, Govt. of India</strong> Ref: 01(2836)/15/EMR-II, Dated 02.06.2015 (2015-2018).
  • Seed grand fund, TEQIP, VSSUT, Burla
  • Collaborative Research and Innovation Scheme, TEQIP III, VSSUT, Burla
  • Reactive power control of isolated wind-diesel hybrid system with FACTS devices 15-07- 2016 14-07- 2017 TEQIP- II (World Bank) VSSUT/TEQIP/88/2016 Dt. 15.7.2016 (1 year), &#8377;75000.00 (Principal Investigator).
  • Energy management by improvement of PV generation dispatchability in isolated system and DC microgrid 16-01- 2020 15-01- 2021 TEQIP- III (World Bank) VSSUT/TEQIP/35/2020 Dt.16.1.2020 (1 year) &#8377;45000.00 (Principal Investigator).
  • Short-term Forecast of Photovoltaic Power and Islanding Detection by Intelligent Techniques. 30-04- 2022 Continuing OSHEC, Odisha (Seed Fund) 473/135/OSHEC Dt.30.4.22 (2 years) &#8377;487000.00 (Principal Investigator).
  • Coordinator of the AICTE sponsored "National Conference on Green Technology Revolution: India's Future Energy Perspective (NCGTR-2019)" as per Ref. no. 67-61/RIFD/GOC/Policy-1/2017-18 dt.22.04.2019 of sanctioned amount Rs.5,00,000.00 (Rupees Five Lakhs Only) for organizing the conference during October 19-20, 2019
  • Co-PI of the AICTE sponsored MODROB project titled "Modernization of Electrical Power System Laboratory" of amount Rs. 18,00,000.00 approved for 02 years duration and sanctioned on 08th September, 2017. (Ref. no. 9-44/RIFD/MODROB/Policy-1/2016-17)
  • Seed grand fund, TEQIP, VSSUT, Burla
  • Seed grand fund, TEQIP, VSSUT, Burla
  • Collaborative Research and Innovation Scheme, TEQIP – III, VSSUT, Burla
  • IIT GUWAHATI TECHNOLOGY INNOVATION AND DEVELOPMENT FOUNDATION “Sensor-based Health monitoring of large dam in hydro power plant with AI integral approach” sanctioned amt 18 lakhs ,dated 01-02-2024
  • AICTE-R&D project-73, “Robust Controller Structure for coordinated voltage regulation and stabilization-2002, Rs.5 Lacs. at UCE Burla.
  • Completed the Project as Principal Investigator AICTE(R&D) Project “Application of Advanced signal Processing Techniques to Fault diagnosis to Power System Elements” in 2006 at UCE Burla.
  • Completed the project AICTE/modrob project on modernisation of power electronics & drives laboratory in 2006 as Head (Electrical) at UCE Burla
  • Modernisation of High Voltage laboratory, 2007, AICTE MODROB Project Amount :-Rs10. lacs as Head (Electrical) at UCE Burla
  • Principal Investigator, of AICTE-RPS project-19, “Transient Stability Analysis and Control of Power Systems with Excitation Control-2012, Rs.7.5 Lacs. at VSSUT, Burla
  • Applied for CRS Project to NPIU in May 2019
  • "Performance enhancement of a slotted fin heat sink: An Experimental and Computational investigation" funded by OSHEC(Odisha State Higher Education Council)
  • Funding Agency (Scheme) Year : DST (SERC)-2007Title : Design, Development and Fabrication of a CVD set-up for diamond coating on cemented carbide cutting tool inserts for machining non-ferrous materialsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 18.36Status - completed / ongoing : Completed
  • Funding Agency (Scheme) Year : AICTE (RPS)-2008<br> Title : Characterization of Hot Filament Chemical Vapour Deposition (HFCVD) diamond coated carbide inserts<br> PI/Co-PI : PI<br> Duration(years) : 2.0<br> Amount Sanctioned(In Lakhs) : 5.50<br> Status - completed / ongoing : Completed
  • Funding Agency (Scheme) Year : DST (FIST)-2008Title : Development of Mechanical Engineering LaboratoryPI/Co-PI : Co-PIDuration(years) : 5.0Amount Sanctioned(In Lakhs) : 70.00Status - completed / ongoing : Completed
  • Funding Agency (Scheme) Year : AICTE (RPS)-2009<br> Title : Biasing and Nucleation study by addition of metal powders on growth of diamond by Hot Filament Chemical Vapor Deposition (HFCVD) method on cemented carbide inserts<br> PI/Co-PI : PI<br> Duration(years) : 3.0<br> Amount Sanctioned(In Lakhs) : 6.49<br> Status - completed / ongoing : Completed
  • Funding Agency (Scheme) Year : AICTE (MODROB)-2010<br> Title : Modernization of  Material Research Laboratory<br> PI/Co-PI : Co-PI<br> Duration(years) : 1.5<br> Amount Sanctioned(In Lakhs) : 7.56<br> Status - completed / ongoing : Completed
  • Funding Agency (Scheme) Year : AICTE (RPS)-2012Title : Development of nano/ultranano diamond coating on cemented carbide inserts by Hot Filament Chemical Vapor Deposition (HFCVD) methodPI/Co-PI : PIDuration(years) : 2.0Amount Sanctioned(In Lakhs) : 14.10Status - completed / ongoing : Completed
  • Funding Agency (Scheme) Year : CSIR-ERD-2013Title : Development of NCD and UNCD diamond coatings and their characterization on cemented carbide insertsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 21.92Status - completed / ongoing : Completed
  • Funding Agency (Scheme) Year : UGC-MRP-2013Title : Development of a high vacuum brazing furnace for joining metals to ceramicsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 14.97Status - completed / ongoing : Completed
  • <strong>In the capacity of H.O.D. :</strong> I was looking after for the purchase and installation of two major equipments (i.e. Instron make UTM of 10 ton capacity and Piezo-electric Force Dynamometer) costing Rs 55 lakhs funded by DST-FIST (from February 2009 to July 2014).
  • AICTE - MODROB project costing Rs 7.56 lakhs for “Modernization of Materials Research Laboratory” (2010-2013).
  • AICTE - MODROB project costing Rs 2.8 lakhs for “Machining Performance Evalution of CVD/PVD Coated Carbide Al2O3 ceramics and CBN/Diamond cutting tool inserts”. (in June 2014).